Automatic tuning and storing in the memory the TV channels via Autoprogram
The channels located via the autoprogram (Automatic Tuning System) feature of your television are automatically lined up.
is done as the selected country channels with teletext and transmitting the channel name information ranking the first, followed by all the channels not transmitting the name information with teletext and the ones without teletext and finally the foreign channels that do not transmit the name information in the teletext.
COUNTRY SELECTION
BELGIUM | HUNGARY | PORTUGAL | |
CZECH REP. | IRELAND | SCHWEIZ | |
DANMARK | ITALIA | SUOMI | |
DEUTSCHLAND | NETHERLANDS | SVERIGE | |
ELLADA | NORGE | TÜRK‹YE |
|
ESPAÑA | ÖSTERREICH | U. K. | |
FRANCE | POLSKA | . . . . . |
|
|
| ||
|
|
|
|
OK START AUTOPROGRAMMING | |||
| MENU | BACK | |
|
|
|
|
AUTOPROGRAM |
|
SEARCHING | 2 % |
MENU S T O P
Manual tuning and storing of the television channels:
Press the (
) button. Move onto the channel settings menu by pressing the down movement button (
). When you select the autoprogram tab by pressing the Up/down direction (
)/(
) buttons and pres the button (
), the autoprogram menu will be visualized on the screen. In the country tab, select the country of which you would like to watch the broadcast in priority by pressing the right/left direction buttons (
)/(
). Then, start the autoprogram operation by pressing the (
) or (
) button.
The channels will automatically be scanned and the channels that have broadcast shall started to be entered into memory as of the program that is selected on the channel settings menu. At the same moment, the
at any given time, please press the (
) button.
The Program table will appear on the screen after the automatic search is over.
You can assign any channel to any program number you would like from among program numbers that have been stored in the memory as described in the part Program Table.
SETUP
SYSTEM | BG |
CHANNEL | C - - |
FINE TUNE | 0 |
SEARCH |
|
PROGRAM NO | P 01 |
STORE |
|
AUTOPROGRAM |
|
|
|
SELECT | MENU EXIT |
|
|
If you already know the Channel number:
Press the (
) button. Move onto the c h a n n e l settings menu by pressing the down movement button. Go onto the menu with the (
) button. Select the system in which you would like to make the search from among the system tabs.
Enter the Channel tab by pressing the movement button (
) below. Pressing 
the 
)/(
) or (
) on your remote control, select the “S” for cable channels and “C” for broadcasts received via the antenna. Move onto the program no. tab and select the program in which you would like to have the Setup made via the
numerical buttons.
If the broadcast viewed on the screen is of your desired quality, firstly come onto the storing tab via the downward movement (
) button to store in the memory the process you have made and select it with the (
) button. The prompt ‘stored’ shall be briefly displayed.
The channel will be stored according to the program number of your choice. You can tune and store in the memory the other channels in the same way. In the event that you wish to exit the channel settings menu for any reason, simply press the (
) button.