SETUP
SYSTEM | BG |
|
CHANNEL | C - - |
|
FINE TUNE | 0 |
|
SEARCH |
|
|
PROGRAM NO | P 01 |
|
STORE |
|
|
AUTOPROGRAM |
|
|
|
|
|
|
|
|
SELECT | MENU | EXIT |
|
|
|
If you do not know the channel number
Press the MENU button. Move onto the channel settings menu by pressing the down movement button. Select the program in which you would like to perform an Installation using the right- left movement ()/() or numerical
buttons. Select the system in which you would like to make the search from among the system tabs. Enter the System tab by pressing the direction button () below. Here, your television can be set to a single system and you can also select from among more than one systems via the ()/() buttons. (option) Move from here to the channel tab via the downward movement button (). Pressing the () keys on your
remote control, select 'S' for cable channels and 'C' for broadcast received from the antenna; select the search tab with the downward movement button () and scan the channels in ascending order with the Right direction button () and in descending order with the left direction () button. If the channel that is found is of your desired quality, select the storing tab. Then store it in the memory pressing the button (). Repeat the same procedure also for the other channels by selecting the program number of your choice from among the program no. tab.
If there is need to perform Manual Fine Tuning on the current channel or to name the current channel, refer to the related parts.
Fine Tuning
If the current channel requires Fine Tuning, then select the fine tuning tab by using the downward movement button () in the Channel Settings menu. Using the
AFC values of your television will automatically adjust and lock themselves to the channel. However, you might
need it in case the television transmitters do not operate according to the standards. To store in the memory the settings you have made, select the Store option and press the right button ().
SETUP
SYSTEM | BG |
CHANNEL | C - - |
FINE TUNE | 0 |
SEARCH |
|
PROGRAM NO | P 01 |
STORE |
|
AUTOPROGRAM |
|
|
|
|
|
SELECT | MENU EXIT |
|
|
Program Table
Press the () button. Move onto the Program Menu by pressing the downward movement button. When you press the
button (), the program table will appear on the screen.
Switching the locations of the program channels that have already been stored:
Select the program you would like to relocate by pressing the upwards- downwards ()/() or
buttons ()/(). Press the “GREEN” colored button. The cursor on the selected program will blink.
the other program to which you would like to relocate it with the
()/() or
()/(). Finish the relocation process by pressing the “GREEN” colored button. The channel in the first program number you selected has been moved to your second selected program number and the channels between both program numbers have been shifted to the initially selected program number.