JVC AV 24F702 manual To Memorize Channels, Automatic Channel Memory, TV/CATV Selection

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels.

Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the CATV setting.

AUTOMATIC CHANNEL MEMORY

1	Press the MENU button.
2	Press the CH + (▲) or – (▼) button
	until the indicator next to "CH SET-

UP" begins to flash, then press the ENTER button.

MENU

CLOCK SET

ON/OFF TIMER

CH SET-UP

PICTURE

AUDIO

LANGUAGE / IDIOMA / LANGUE

V-CHIP SET

▲ / ▼ / ENTER / MENU / EXIT

TV/CATV SELECTION

3	Press the CH + (▲) or – (▼) button	CH SET-UP
		TV CATV
		AUTO CH MEMORY
	until the indicator next to "AUTO CH	ADD / DELETE

1 Press the MENU button.

2 Press the CH + (▲) or – (▼) button until the indicator next to "CH SET- UP" begins to flash, then press the

MENU

CLOCK SET

ON/OFF TIMER

CH SET-UP

PICTURE

AUDIO

LANGUAGE / IDIOMA / LANGUE

V-CHIP SET

	CH LABEL
MEMORY" begins to flash, then press	▲ / ▼ / ENTER / MENU / EXIT
the ENTER button. The TV will begin
memorizing all the channels available
in your area.

ENTER button.

3 Press the CH + (▲) or – (▼) button until the indicator next to "TV/CATV" begins to flash.

4 Press the VOL + ( ) or – ( ) button to select the TV or CATV mode. The arrow indicates the selected mode.

5 Press the EXIT button.

▲/ ▼ / ENTER / MENU / EXIT

CH SET-UP

TV CATV AUTO CH MEMORY

ADD / DELETE

CH LABEL

▲ / ▼ / / / MENU / EXIT

4 Press the EXIT button.

TO ADD/DELETE CHANNELS

1	Press the MENU button.
2	Press the CH + (▲) or – (▼) button
	until the indicator next to "CH SET-
	UP" begins to flash, then press the
	ENTER button.
3	Press the CH + (▲) or – (▼) button
	until the indicator next to "ADD/

MENU

CLOCK SET

ON/OFF TIMER

CH SET-UP

PICTURE

AUDIO

LANGUAGE / IDIOMA / LANGUE V-CHIP SET

▲/ ▼ / ENTER / MENU / EXIT

CH SET-UP

TV CATV

AUTO CH MEMORY

ADD / DELETE

CH LABEL

NOTE: Contact your cable company to determine the type of cable system used in your area.

DELETE" begins to flash, then press

the ENTER button.

4 Select the desired channels to be

added or deleted using the 10-key

pad (0-9) or the CH + or – button.

▲ / ▼ / ENTER / MENU / EXIT

5 Press the VOL + ( ) or – ( ) button to select ADD or

DELETE.

If an unmemorized channel was selected (step 4), the channel indication will be red. Press the VOL + ( ) or – ( ) button if you wish to ADD the unmemorized channel. The channel indicator will change from red to green when a channel is added and the channel will be memorized. If a memorized channel was selected (step 4), the channel indication will be green.

Press the VOL + ( ) or – ( ) button if you wish to DELETE the channel from memory. The channel indicator will change from green to red when a channel is deleted.

Repeat Steps 4 and 5 for each channel to be added or deleted.

ADD CH 012

0-9 ▲ / ▼ / / / MENU / EXIT

6 Press the EXIT button after adding or deleting all of the desired channels, to return to normal TV viewing.

14