TV channel presetting
To register the TV channels auto- matically (AUTO PROGRAM)
You can register the TV channels into the TV’s channel list automatically.
1 Display the INSTALL menu.
❇MENU 
INSTALL
2 Choose AUTO PROGRAM, then press the MENU/OK button.
AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically.
3 The EDIT menu appears.
To edit the | Proceed to the Step 3 of “To |
channel list | edit the channel list (PR list)” |
| on this page. |
If a channel is | Proceed to the Step 3 of “To |
not registered | register the channel manually” |
| on this page. |
To exit the menu Press the MENU/OK button.
For details of “SETUP TOUR”, see page 16.
To register the TV channels manually (MANUAL in the EDIT menu)
You can register the TV channels into the TV’s channel list manually.
1 Display the INSTALL menu. |
| ||
❇ MENU | INSTALL |
| |
2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.
3 Choose the channel which you want to register.
4 Press the blue button to activate the MANUAL function.
The sound system of the channel appears at the right of the CH/CC number.
5 Press the 3 button to choose an appropri- ate sound system.
For details, see “SOUND SYSTEM” on page 11.
6 Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
7 Repeat step 5 until your desired TV channel appears.
If the reception | Press the blue or yellow button |
is poor | to fine tune the TV channel. |
If noisy sound | Press the 3 button to choose |
is heard | an appropriate sound system. |
8 Press the MENU/OK button to exit the menu.
To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR numbers will be changed.
1 Display the INSTALL menu. |
| ||
❇ MENU |
| INSTALL |
|
2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.
3 Choose the channel which you want to change PR number, or delete.
4 Do the following action:
To change the | Press the 3 button. Then move |
PR number | it to the PR number you want |
(MOVE) | to use it for the channel. |
| Finally press the 2 button. |
To delete the | Press the yellow button. |
channel (DELETE) |
|
5 Press the MENU/OK button to exit the menu.
❇About the basic operations of the menu, please see the “How to operate menus and menu locations” on page 4.
17