PICTURE FEATURES
MAX:
The level of DigiPure effect is set to the maximum. If you set the DigiPure Pro function to AUTO but feel that the original picture quality has not been reproduced fully, change the setting from AUTO to MAX.
•The MAX setting is not suitable for low- quality pictures which contain a lot of noise.
OFF:
The DigiPure Pro function is turned off.
COLOUR SYSTEM
The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
COLOUR SYSTEM
PAL
OK
1Choose COLOUR SYSTEM then press the a button
2Press the 5buttons to chose the appropriate colour system.
Then press the a button
PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input signal. Only when you are viewing a picture from Programme number PR 0 (AV), or EXT terminal, you can choose using the AUTO function.
•The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.
•When in the Programme numbers PR 0 (AV) to PR 99, you cannot choose NTSC 3.58 or NTSC 4.43.
MOVIE THEATRE
The MOVIE THEATRE function displays a cinema film picture more smoothly and naturally on the screen.
AUTO:
The television automatically recognizes the type of signal and turns the function on and off.
ON:
This function is turned on.
OFF:
This function is turned off.
•The motion may appear unnatural when viewing images with the NTSC colour system. When the MOVIE THEATRE function is set to AUTO or ON, the motion may appear unnatural when viewing images with the NTSC colour system.
39