JVC 0405TKH-CR-MU Connecting the power cord to, AC outlet, Insert the CAM to the slot of the TV

Page 7

			Setting up your TV


	To view the pay-per-view of the		Connecting the power cord to
Digital Terrestrial broadcasting		the AC outlet

It is required to subscribe to a pay-per-view company to view the pay-per-views of the Digital Terrestrial broadcasting.

Obtain the Conditional Access Module (CAM) and the Viewing card by subscribing to a pay-per-view company, then insert those to the Television using the following procedure.

1Switch off the TV and unplug from the mains.

2Insert the Viewing Card to the CAM.

•The Viewing Card should be inserted straight into the slot.

3Insert the CAM to the slot of the TV.

•The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.

4Connect the TV to the mains supply, switch on, and then wait for few moments until the card is activated.

•Some CAMs may require the following set up.

Please set the CAM by entering the DTV menu, Common Interface then pressing abutton. (CAM set up menu is not displayed when it is not required.)

•To see the viewing contract information, press H, Select DTV and Press a, then Select Common Interface and press a.

Insert the AC plug on the power cord from the TV into an AC outlet.

Caution

•Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit.

Putting the batteries into the remote control

Use two AA/R6 dry cell batteries.

Insert the batteries from the -end, making sure the +and -polarities are correct.

•Follow the warnings printed on the batteries.

•Battery life is about six months to one year, depending on how much you use the remote control.

•The batteries we supply are only for setting up and testing your TV, please replace them as soon as you need to.

•If the remote control does not work properly, replace the batteries.

7

Image 7

Contents AV-32EX5BK AV-28EX5BK „ Guidelines for safe operation How to replace the fuse„ Warning „ If in doubt consult a competent electricianHow to move the TV Do not block the TV’s ventilation openings or holes Digital terrestrial broadcasting DVB-T service areaContents Connecting the aerial Setting up your TVViewing Card should be inserted straight into the slot Connecting the power cord toPutting the batteries into the remote control AC outletPress the a button Initial settingsPress the Main power button on Power lamp lights green and the JVC logo is displayedPress the a button to display the T-V Link menu To cancel the Auto Program function Press the TV/DTV buttonPress the Hbutton After the Auto Program has finished, the Edit menu appears„ Downloading the data to VCR Link functions„ Pre-set download „ Direct Rec „ TV Auto Power On/VCR Image ViewDo not turn the TV off in the following cases Turn the TV on from standby mode Turn the Main power onBasic operations TV Choose a TV channel Adjust the volumePress the r Volume button once Volume level indicator appearsSubtitle button Basic operations Remote controlPress the # standby button to turn the TV on or off Turn the TV on or off from standby modeBroadcasting is switched every time the button is pressed Choose a TV channel and watch images from external devicesAuto Zoom functionRegular Zoom Subtitle „ Choose the Zoom mode„ Adjusting the visible area of the picture PanoramicYou can enjoy sounds with a wider ambience 3D Cinema Sound functionOperation while watching DTV Using the Electronic Programme Guide EPGInformation function „ Using the Rec Timer „ Using the Set ReminderPress the green button „ Using the Genre functionCancelling the Genre function Displaying the SubtitlesOperate it with the colour buttons, 7 buttons and a button Digital Teletext functionPress the g button Digital teletext information appearsOperation with the DTV menu Rec TimerDisplaying the DTV menu End Choose Timers and press the a buttonWhen recording on a T-V Link compatible VCR When recording on a T-V Link incompatible VCRAborting timer recording While the timer is in operation„ Subtitle language Configuration„ Favourite Mode „ Audio Language„ Enter PIN code „ Receiver UpgradeSetting window appears DisableChoose Edit PR List and press the a button Edit PR List„ Choosing a channel „ Deleting a channelEnter PIN code input window appears „ Editing a channel name„ Locking a channel Edit window appearsManual Search Installation„ Setting the favourite channels Choose Installation and press the a buttonCommon Interface First Time InstallationTime display Operation while watching analogue TVPR List Channel number displayBasic operation Analogue teletext functionReveal Using the List ModeHold Sub-pageSize CancelIndex Setting the TV Colour Temp Picture SettingPicture Mode Picture AdjustmentDigital VNR Picture FeaturesDigiPure Pro Ntsc Colour SystemMovie Theatre PALPicture Tilt Auto AspectChoose 43 Auto Aspect then press the a button Hyper Sound Sound SettingSound Adjustment Stereo / ISurround 3D Cinema SoundBass Boost S-VIDEO input EXT SettingID List DTV DubbingTo erase a name assigned to the EXT terminal Press the 5 buttons to choose the arrow from the menuChild Lock FeaturesSleep Timer Blue BackPress the Number buttons to enter the ID number To reset the Child Lock function„ To view a locked TV channel Press the 6 buttons to choose a TV channelDecoder EXT-2 Press the TV/DTV button to exit the T-V Link menu InstallAuto Program Choose Auto PROGRAM. Then press the a buttonDelete EDIT/MANUALMove InsertPress the 3 button to start the Move function „ IDPress the red button to start the ID function Press the yellow button to delete the TV channel To cancel the Insert functionTo cancel the Manual function Press the Number buttons to enter the remaining CH numberPress the green or red button to search for a TV channel AttenuatorNormal Edit menu is resumed Before connecting anything Connecting the external devicesAdditional preparation „ Connection when recording to „ Equipment which can output the S-VIDEO signal Y/C signal„ Connecting headphones „ Video or sound signal output from the EXT-2 terminalVCR „ Connecting Speakers/AmplifierSet the VCR/TV/DVD Switch to the VCR or DVD position Operating a JVC brand VCR or DVD playerCH numbers „ No picture or no sound Troubleshooting„ If you cannot turn on the TV „ If you cannot turn off the TV„ Other issues „ If the TV does not respond to the remote control„ Poor sound Troubleshooting We may change the design and specifications without notice SpecificationsPage Page