Sylvania 6427GFG A owner manual Change Code, Sleep Timer

C CHANGE CODE

4Display the "CHANGE CODE" screen.

•Using [CH K/L] on the remote control, select "CHANGE CODE".

TV RATING

MPAA RATING

CHANGE CODE

• Press [VOL X] on the remote control.

5Change the access code.

•Use Channel number buttons on the remote control and enter the NEW 4-digit CODE.

•Enter code again in CONFIRM CODE box.

NEW CODE

_ _ _ _

CONFIRM CODE

_ _ _ _

6To exit the menu, press [MENU] on the remote control.

NOTES:

•Make sure to enter the exact same new code in the "CON- FIRM CODE" space as one in the "NEW CODE" space. If they are different, the "NEW CODE" space is cleared for reentering.

•Your personal access code will be erased and return to the default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you forget the code, unplug the power cord for 10 seconds to restore the access code to 0000.

SLEEP TIMER

The SLEEP TIMER function will automatically turn off the power of the unit at a preset time.

1	2	3
4	5	6
7	8	9
–/ENT		CHANNEL
		RETURN
	0	+100
		CH
	VOL	VOL
		CH
		SLEEP
MENU	INPUT	SLEEP MUTE
	SELECT

1Use SLEEP TIMER.

•Press [SLEEP] on the remote control.

•The setting display for SLEEP TIMER is shown in the screen.

SLEEP 0

2Set the timer.

•Every time you press [SLEEP] on the remote control, the time increases by 10 minutes.

•You can set the timer up to 90 minutes.

•After setting, you can check the remained time per 1 minute by pressing [SLEEP].

SLEEP 16

NOTES:

•When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be can- celed.

•To cancel the sleep timer, press [SLEEP] on the remote control repeatedly until "SLEEP 0" is displayed.

•The Sleep Timer setting display will automatically disappear after 10 seconds.

26

EN