DTV
When scanning DTV only
1Select digital mode by pressing [DTV/TV].
2Display the MENU screen.
•Press [MENU] on the remote control. The following MENU screen is displayed.
PICTURE CHANNEL SET [ENG]/ESP/FRA
3Select "CHANNEL SET".
•Using [CH K/L] on the remote control, select "CHANNEL SET".
PICTURE
CHANNEL SET [ENG]/ESP/FRA
DTV TV
When scanning both DTV and TV at the same time
*You can access this menu from both modes (analog / digital).
1Display the MENU screen and select ”CHANNEL SET".
•Press [MENU] and select "CHANNEL SET" using [CH K/L] on the remote control.
PICTURE
CHANNEL SET [ENG]/ESP/FRA
• Press [VOL X] on the remote control.
2Using [CH K/L] on the remote control, select "AUTO PRESET CH(DTV/TV)".
ADD/DELETE(DTV)
AUTO PRESET CH(DTV)
AUTO PRESET CH(DTV/TV)
OTHER SETTINGS
• Press [VOL X] on the remote control.
4Using [CH K/L] on the remote control, select "AUTO PRESET CH(DTV)".
ADD/DELETE(DTV)
AUTO PRESET CH(DTV)
AUTO PRESET CH(DTV/TV)
•Press [VOL X] on the remote control. Scanning and memorizing the channels auto- matically starts.
AUTO PRESET CH(DTV)
•When the scanning and memorizing are com- pleted, the memorized smallest channel in the digital broadcasting will be displayed.
•Press [VOL X] on the remote control. Scanning and memorizing the channels auto- matically starts.
AUTO PRESET CH(DTV/TV)
•When the scanning and memorizing are com- pleted, the memorized smallest channel in the analog broadcasting will be displayed. If no analog channel is memorized, the memorized smallest channel in the digital broadcasting will be displayed.
NOTES:
•If you press [POWER] or [MENU] on the remote control while setting AUTO PRESET CH, AUTO PRESET CH set- ting will be canceled.
•If there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of channel scanning.
NO TV SIGNALS
29
EN