Dolby Laboratories V07TV13 TV Screen Display Mode, To Cancel the Sleep Timer, Letterbox, Zoom

WATCHING TV

5TV Screen Display Mode

DTV

2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal.

1 Press [MENU] to display the main menu.

5Sleep Timer

The sleep timer can be set to automatically turn off the unit after an incremental period of time.

1 Press [SLEEP] to set the sleep timer.

MENU

2 Use [CH K/L] to select “DTV SETUP”, then press [VOL X].

e.g.) digital TV mode

CH	-	TV SETUP -
or	PICTURE
CH	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	DTV SETUP

VOL

3 Use [CH K/L] to select “DTV DISPLAY”, then use [VOL X/Y] to switch the desired TV aspect ratio.

CH	- DTV SETUP -
or
CH	DTV DISPLAY [LETTERBOX]
	DTVCC

VOL or VOL

SLEEP

SLEEP OFF

• Sleep timer display appears on the TV screen.

2 Press [SLEEP] repeatedly to change the amount of time until shut off.

SLEEP

SLEEP 120MIN.

•You can set the unit to turn off after a set period of time (from 30 to 120 minutes).

•Each press of [SLEEP] will increase the time by 30 minutes.

•After set up, the sleep timer display can be called up for checking by pressing [SLEEP].

To Cancel the Sleep Timer

Press [SLEEP] repeatedly until “SLEEP OFF“ is displayed on the TV screen.

Note:

• The sleep timer setting display will automatically disappear in a few seconds.

• When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.

LETTERBOXZOOM

[LETTERBOX]

Display the digital-supported program in full-screen. Black borders will spread in the upper and lower screen.

[ZOOM]

Enlarge and display the center area of the digital- supported program.

The right and left side of image will be cut off.

4 Press [MENU] to exit.

MENU

Note:

•You may not switch the display mode depending on the program.

14

EN