Closed Caption, Off | Dolby Laboratories V07TV13 instruction

OPTIONAL SETTING

5Closed Caption

You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired.


		3 Press [MENU] to exit.
1 Press [MENU] to display the main menu.		3 Press [MENU] to exit.
MENU		MENU
MENU

2 Use [CH K/L] to select “CAPTION”,

then use [VOL X/Y] to change the setting.

e.g.) digital TV mode

	-	TV SETUP -
	PICTURE
	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
CH	DTV SETUP
CH

OFF

Note:

• To show the closed caption on your TV screen, broadcast

signal must contain the closed caption data.

• Not all TV programs and commercials have the closed

caption or all types of the closed caption.

• Captions and texts may not match the TV voice exactly.

• Changing channels may delay the closed caption for a few

seconds.

• Adjusting or muting the volume may delay the closed

caption for a few seconds.

• Abbreviations, symbols and other grammatical shortcuts

may be used in order to keep pace with the on-screen

action. This is not a problem with the unit.

• The caption or text characters will not be displayed while

the main menu or functions display is shown.

• If a black box appears on the TV screen, this means that

VOL or VOL

CAPTION1

CAPTION2

TEXT1

TEXT2

the closed caption is set to the text mode. To clear the box,

select “C1”, “C2” or “OFF”.

• If the unit receives poor quality television signals, the

captions may contain errors, or there might be no captions

at all. Some possible causes of poor quality signals are:

- Automobile ignition noise

- Electric motor noise

- Weak signal reception

- Multiplex signal reception (ghosts or screen flutter)

[Caption Mode]

CAPTION1 (C1) and TEXT1 (T1);

are the primary caption and text services.

The captioning or text is displayed in the same language as the program’s dialogue

(up to 4 lines of script on the TV screen, where it does not obstruct relevant parts of the picture).

CAPTION2 (C2) and TEXT2 (T2);

are rarely available and broadcasters use them

only in special conditions, such as when “CAPTION1” or “TEXT1” is not available.

•There are 3 display modes according to programs: Paint-on mode: Displays input characters on the TV

screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines).

• The unit retains the closed caption setting if the power fails.

• When the unit receives a special effects playback signal (i.e.,

Search, Slow and Still) from a VCR’s video output channel

(CH3 or CH4), the unit may not display the correct caption

or text.