Useful Remote Control Features, Display, Scan

Instruction Manual

FUNCTIONS & FEATURES (continued)

Function Selection Menus (continued)

MPAA-Rating: Use the up or down arrow key to navigate between the ratings. Pressing the MENU key with a rating highlighted will block that particular rating from being shown on this TV. A U indicates a rating which is unblocked and a B indicates a rating which is blocked. Please note that blocking a lower rating (for example, PG) will block all higher ratings (PG-13, R, NC-17, X.)

Age	Defined as	Contents	Defined as
TV - Y	All Children	FV	Fantasy Violence
TV - Y7	Directed to Older Children (over 7)	D	Sexual Dialogue
TV - G	General Audience	L	Adult Language
TV – PG	Parental Guidance Suggested	S	Sexual Situations
TV - 14	Parents Strongly Cautioned	V	Violence
TV - MA	Mature Audience Only

Password Setting Guide: This feature allows you to change the access code for the Parental menu. Press the right arrow or ENTER key to access the sub menu. Then enter the new password using the numeric keypad. If the right number was entered, “New Password OK!” are displayed on the screen. If not, "Invalid! Enter again!" are displayed.

MPAA-Rating

→G	U
PG	U
PG-13	U
R	U
NC-17	B
X	B


Move:↑↓	ADJ:← → Exit:
		MENU

Password Setting

→New Password - - - -

Confirm- - - -

Enter Password

Setup Menu

From the Main menu screen, press the left or right arrow key until Setup is highlighted. Then the Setup menu is displayed. Use the up or down arrow key to move between the various selections in this menu.

Language: This feature allows you to pick a language used for the on screen display (OSD). Use the left or right arrow key to select the language of your choice – English, French, Portuguese or Spanish.

Closed Caption: Closed caption is a feature that allows your TV set to display closed caption signal on screen. It also allows you to display teletext signal. There is nine different setting for closed caption. You can set it to one of the 4 Closed Caption settings (CC1-4), one of the 4 Text settings (T1-4), or set this feature to off (CCD/Text off).

Useful Remote Control Features

Display

Setup
→ Language	English
Closed Caption	CC1

Move:↑↓ ADJ:← → Exit:MENU

This key allows you to display the current information of the TV screen (channel, antenna mode, time, video, etc.). Display disappears in about 6 seconds.

0-9

Press the 0-9 keys to enter channel numbers directly (2-69 in the Air mode or 1-125 in the Cable mode).

1.To choose a one-digit channel number, press the corresponding numeric key directly to switch to the desired channel number in about 3 seconds.

2.To choose a two-digit channel number, enter a first-digit and then a second digit within 3 seconds.

3.To choose a three-digit channel number, enter a first-digit, second-digit and third-digit respectively in the way mentioned above.

Scan

Press the SCAN key to display the current channel No. and Scan mode (Scan On or Scan Off). Press the key firstly to display Scan Off on the screen. Press the key secondly to display Scan On on the screen. And the TV begins to scan through all active channels. Upon completion, the TV automatically returns to the current channel and shifts to the Scan Off mode. Pressing any key can interrupt scanning.