Durabrand DCC1903, DCC1303 Hints for Automatic Timer Recording, Auto Return, Wake UP Timer

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator goes off.

2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the F.FWD/B button. The details of pro-

grams appear on the TV screen.

5)Press the MENU button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

•Make sure the channel you want to record is prop- erly set in advance.

•It is not necessary to press the RECORD button for timer recording.

•Recording begins automatically at the Start time.

•If you are recording using a Timer mode, you may not operate the unit manually.

•The erase-prevention tab on the cassette must be in place (or you must put tape over the hole).

•If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off.

•If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediate- ly, and the tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.

3Auto Return will begin

When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s).

NOTE:

•If you press the POWER button while tape is rewinding, the Auto Return will stop.

4Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. Then, press the MENU button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

WAKE UP TIMER

The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time.

NOTES:

•Use the remote control for this procedure.

•Clock must be set to the correct time before setting the timer.

•If you want to select [TAPE], you must insert a cassette tape in the TV/VCR. The tape will start playback automatically on your desired time.

1 Select “USER’S SET UP”

Press the MENU button on the	– M E N U –
	TIMER PROGRAMMING
remote control.	PICTURE CONTROL
	SETTING CLOCK
Press the PLAY/K or STOP/L but-	CHANNEL SET UP
	B USER’S SET UP
	V-CHIP SET UP
ton to point to “USER’S SET UP”.	LANGUAGE [ENGLISH]
	CAPTION [OFF]
	ZERO RETURN
Then, press the F.FWD/B button.	TIME SEARCH

1Select “WAKE UP TIMER”

Press the WAKE-UP/SLEEP button on the remote control once, and confirm “ON/OFF” is pointed. Press the F.FWD/B or REW/s button until [ON] appears.

WAKE UP B ON/OFF		[ON]
TIMER	TV/TAPE	[TV]
	TIME	[12:00AM]

2 Set “AUTO RETURN” to [ON]
Press the PLAY/K or STOP/L but-	– USER’S SET UP –
ton to point to “AUTO RETURN”.	RENTAL	[OFF]
Press the F.FWD/B or REW/s
	REPEAT PLAY	[OFF]
	B AUTO RETURN	[ON]

button until [ON] appears. Then, press the MENU button on the remote control to return to TV mode.

2 Select “TV” or “TAPE”

Press the PLAY/K or STOP/L but-
ton until to point to “TV/TAPE”.
Press the F.FWD/B or REW/s
button, and select [TV] or [TAPE].	WAKE UP	ON/OFF	[ON]
	TIMER	B TV/TAPE	[TV]
		TIME	[12:00AM]

- 28 - EN

9I03