6.2-Turning on your television for the first time and tuning
Installation Guide menu will be displayed on the screen when you turn on your television for the first time.
Installation Guide
Language Settings English
Active antenna power
Auto tuning
Select 
Exit
Press Right/Left movement buttons to select the desired menu language from the Language tab. If you are using an active antenna, (See page 16) set the active antenna power feature to On. Select Auto Search by pressing the down movement button and confirm your selection with OK button or the right movement button. Country Selection menu will be displayed. Make the Country and Scan Type selections by pressing the Up/Down, Left/Right movement buttons. Time Zone will be set automatically according to the country selected. If the antenna connections are correct, press OK button to start Auto Search.
Press EXIT button to cancel the Auto Tuning.
6.3-Performing Digital channel settings
You can tune the Digital programs automatically or manually and store them in your television.
Press the MENU button on your remote control. Select CHANNEL SETUP by pressing the Right/Left movement button and confirm your selection with OK button. Select Auto Tuning tab by pressing the Up/Down movement buttons and press Right movement button or OK button to confirm. Country Selection menu will be displayed.
CHANNEL SETUP
Please select country and scan type, then press OK to start tuning
Country Selection | England | |
Scan Type | DTV | |
Time Zone | London GMT | |
Select | Back | |
Exit | ||
|
Scroll to the Country Selection
tab by pressing the Up/Down
movement buttons and press Right/ Left movement buttons to select your country. Then, scroll to the Scan Type tab by pressing the
Down movement button and select DTV option by pressing the Right/ Left movement buttons. Press OK button to
confirm your selections. Digital channels are searched and stored automatically. At the same moment, the progress of auto tuning and the channels stored in the memory are displayed in the menu.
Searching
%1 68 MHz
1
2
Exit
Program Table menu is displayed at the end of the Auto Tuning.
Note: If you wish to search the Digital and Analogue channels concurrently, choose Scan Type as Digital and Analogue from the Auto Tuning menu.
11