6.6.8-Channel List
If you press OK button when no menu is open, Channel List menu will be displayed on the screen.
CHANNEL LİST
Channel 1
Channel 2
Channel 3
Channel 4
Select 
Exit
You can see all the channels of the current mode while you are in the Channel List menu, you can select the desired channel with Up/Down buttons and view it by pressing the OK button.
6.7-Signal Information
This menu gives information about Channel, Network, Modulation, Signal level and quality. Press MENU button to enter this menu. Select Channel Setup menu by pressing the Right/Left movement buttons. Select Signal Information tab by pressing the Down movement button and confirm with Right movement button or OK button. Signal Information menu will be displayed.
Note: Signal Information menu will be active only for Digital broadcasts.
6.8-CA Module (Conditional Access)
In this menu, you can check the CA Module settings. If a CI module is inserted for a channel that has a scrambled broadcast, then a submenu for that module is opened and the information for that module is updated.
6.9-Active Antenna Power
When this feature is set to On, you can connect an external antenna to your television without needing any external source. Scroll to the Active Antenna Power tab by pressing the down movement button in the Channel Setup menu and select On by pressing the Right/Left movement buttons.
| Signal Information | |
Channel | 23 | 490 Mhz |
Network | XX Network |
|
Modulation | 2X 64XXX X2/3 | |
Quality | 60% |
|
Signal Strength | 90% | |
Exit
16