Select Analogue Manual Tuning by pressing the Up/Down movement buttons in the CHANNEL SETUP menu and confirm by pressing the OK button. Analogue Manual Tuning menu will be displayed.
Analogue Manual Tuning
System | I |
Channel | C 4 |
Fine tuning | +00 |
Search |
|
Programme no | 1 |
Skip | No |
Frequency | 62.25 Mhz |
| Save |
Select | Back |
| Exit |
Select the system in which you would like to make the search from the System tab by pressing the Right/Left movement buttons and move to the Channel tab by pressing the down movement button. Press OK on your remote control to select “S”” band cable input or “C”” band aerial input and enter the channel number with numeric buttons. Move onto the Program No tab and enter the channel number in which you would like to have the channel stored. If the broadcast viewed on the screen is of your desired quality, press the Red button on your remote control to store the action into memory.
The channel will be stored according to the program number of your choice. You can tune and store in memory other channels the same way. In the event that you wish to exit the menu for any reason, simply press the EXIT button.
6.4.2.2-If you do not know the channel number
Select Analogue Manual Tuning by pressing the Up/Down movement buttons in the CHANNEL SETUP menu and confirm by pressing the OK button. Analogue Manual Tuning menu will be displayed.
13
Analogue Manual Tuning
System | I |
Channel | C 4 |
Fine tuning | +00 |
Search |
|
Programme no | 1 |
Skip | No |
Frequency | 62.25 Mhz |
| Save |
Select | Back |
| Exit |
In the Program no tab, enter the channel number where you would like to store the searched channel. Select the system in which you would like to make the search from the System tab by pressing the Right/Left movement buttons and move to the Channel tab by pressing the down movement button. Press OK on your remote control to select “S”” band or “C”” band, scroll to the Search tab by pressing the down movement button and press Right/Left movement buttons
to start the search. Press the Red button on your remote control to store the channel you found. The channel will be stored to the channel number of your choice.
6.4.2.3-Fine Tuning
If the channel you found is not of the desired quality and requires Fine Tuning, then select the Fine tuning tab by pressing the Down movement button in the Analogue Manual Tuning menu. Using the Left/ Right movement buttons on your remote control, adjust the broadcast displayed on the screen to your desired quality. Under normal circumstances, you will not require to use the Fine Tune function. The AFC values of your television will automatically adjust and lock themselves to the channel. However, you might need it in case the television transmitters do not operate according to the standards. Press the Red button on your remote control to store the settings you made.
6.5-Electronic TV Guide (EPG)
Electronic TV Guide is for Digital broadcasts only. If it is supported by the broadcasting enterprise, the Electronic TV Guide gives general
information about all of the programs of the next 8 days. To display the Electronic TV Guide, press EPG button on the remote control and EPG will be displayed.