Beko C7 Press the Program down/up buttons to exit the channel row, Automatic tuning Autoprogram

Tuning with channel numbers Enter the SETUP menu by pressing the blue button.

Press the OK button to enter the

CHANNEL row.

Use the OK button to select “S” for cable channels and “C” for terrestrial broadcast.

Use Volume up button to select the channel number buttons. (See page 26).

Enter the channel number using the Numeric buttons.

Press the Program down/up buttons to exit the channel row.

Use the Program down button to select PROGRAM NO.

Use the Volume up/down buttons to select the program number.

(i.e. BBCI = PI etc).

Use the Program down button to select STORE. Press theOKbutton and STORED will appear on the STORE line.

You have now stored the first channel.

Use the Program up button to select again SEARCH and continue the tuning procedure until you have tuned in all the programmes you want or the television can receive.

To exit the SETUP menu press the TV/TX button.

Automatic tuning (Autoprogram)

Enter the SETUP menu as before.

	SETUP
CHANNEL	S 07
SYSTEM	I
FINE TUNE	0
SEARCH	< >
AUTOPROGRAM	OFF
CHILD LOCK
PROGRAM NO	P1

STORE

C/S

BACK

Use the Program down button to select AUTOPROGRAM and press the OK button. A list of countries will appear. Select UK using Program and Volume buttons.

When you are sure the aerial is connected properly press the OK button. Autoprogam will start.

To cancel Autoprogram whilst it isworking press the Menu button.

Your TV is now tuned and ready to use. 9

Please note:

If auto sort fails to arrange the programmes in the required sequence please refer to programme table.

Fine tuning

Although the search and Autoprogram will automatically try and tune to the best reception, in areas of poor reception a bit of fine tuning may be required.

In the SETUP menu use the Program up/down buttons to select FINE TUNE. Use the Volume up and Volume down buttons to fine tune.

When you have finished use the

Program down button to select

STORE and press the OK button.

Stored will be displayed.

Child lock

Childlock switches off the programme you are watching when you select it. In the Set-Up Menu all other programmes are unaffected. If you go back to the programme with childlock on you will see a black screen with the OSD showing

“”. You can lock as many programs as you want.

In the Set-Up Menu.

Press the Volume up button to switch the Child lock on or off.