Connecting a decoder
Via SCART
Make sure the TV and decoder are both switched off.
Plug one end of the SCART lead (not supplied) into the back of the decoder and the other end into the SCART1 on
the back of the TV.
Switch on the decoder and the TV.
Press the AVbutton on the remote control to select AV1.
22
Plug one end of the PHONO lead into the video and audio out sockets on the back of the decoder and plug the other end into the video and audio in sockets on the TV.
Press the AV button repetitively and select the AV3 mode by two scart models or select AV2 mode by one scart models.
Please Note (Model Dependant)
You can record from one external piece of equipment to another via the TV by connecting the playback to SCART 1 recorder to SCART 2 selecting AV1.
You cannot watch the TV.
You can connect NTSC supported equipment
Via PHONO lead (Model Dependant) Make sure the TV and decoder are both switched off.
to the TV via the SCART sockets and adjusting the colour via the PICTURE menu.
Select TINT by using Program down button and use the Volume up and down buttons adjust the colour.
R
AUDIO OUT
L
AV1
AV2