Connecting external equipment
Headphones (optional)
The headphones must have an impedance of between 8 and 32 ohms and have a 3.5 mm stereo jack plug.
Plug the headphone jack into the headphone
socket of the TV.
(See page 14 for adjustments).
Connecting a video recorder
Via SCART
Make sure the TV and video recorder are both switched off.
Plug one end of the SCART lead (not supplied) into the back of the video recorder and the other end into one of the SCART sockets on the back of the TV.
Switch on the video recorder and the TV.
Press the AVbutton on the remote control to select AV1 or AV2 (optional) to correspond with SCART socket you are using on the back of the TV.
Please note: |
|
You can connect a RGB external equipment |
|
via Scart 1. It is necessary to you use full |
|
Scart cable for this purpose. |
|
Select the video outputs of external device |
|
by using its menu to RGB if it’s available. |
|
Via PHONO lead (optional) |
|
Make sure the TV and video recorder are |
|
both switched off. | 19 |
Plug one end of the PHONO lead into the video and audio out sockets on the back of the video recorder and plug the other end into the video and audio in sockets of the TV.
If the sound is in mono use the Audio Input L. In the SOUND menu select MONO.
Press the AV button repetitively and select the AV3 mode by two scart models or select AV2 mode by one scart models.