❺ Using the TV, TV controls, Program selection

❺Using the TV

TV controls

Program selection

Press the Program up or Program down buttons on the TV or remote control or press a Numeric button to select a programme.

To select a programme whose number is greater than 9 using the numeric buttons, press the -/--button first and then press the two Numeric buttons. For example, to select programme 12, press the -/--button followed by 1 and then 2.

Optionally you can also select a program by pressing in the OK button (by ATS included models only).

Press the OK button and program list will appear on the screen with programme numbers on it.

SORTING

P 00	TRT1
P 01	ATV

P 02

P 03

P 04

P 05

P 06

P 07

P 08

P 09

SKIP

MOVE

DELETE

NAME

Use the Program up and Program down buttons to scroll through the program list.

Press the MENU, TXT, 16:9 or i button to close the program list.

Volume

Press the Volume up or Volume down button on the front panel of the TV or press the “Vol“ or “Vol “ button on the remote control. A sound level bar will appear on the screen.

Mute

To mute the sound press the Mute button on the remote control. A loudspeaker symbol will appear onthe screen.

Press the Mute button again to restore the sound. The symbol will disappear.

Pressing Volume down buttons will decrease the volume without restoring .

But pressing the Volume up button will increase the volume with restoring.

ZAPP Function (Optional)

Select the programme you would like to recall by pressing SWAP button. Selected programme number will appear on the upper left side of the screen. Watching any programme, you can recall the selected one by pressing SWAP button again. If you press SWAP button again, you can recall the last programme you watched. You can cancel ZAPP function by pressing INFO button.

ZAPP: PR01 SWAP PR11 PR12 PR13 SWAP

SWAP

Allows you to swap between the program you are watching and the last selected program. i.e. If you were watching Program 1 and change to Program 11, press the SWAP button to go back to Program 1. Press it again to return to Program 11.

PR01 SWAP PR11 SWAP PR01

Note: If Zapping function is available SWAP function will not work.

Info

By pressing the “WHITE (i)” button the programme number and programme name (if it is exist) will appear on the screen. This will disappear automatically after a few seconds.

For use when you are connecting an external source to your TV (Video recorder, DVD player etc.) via the SCART sockets or RCA sockets.

See ‘Connecting external equipment’.