8
Enter the desired program number by using the Ten key program buttons
Use the Volume up/down buttons to select the program number.
Use the Program down button to select STORE. Press the OK button and STORED will appear on the STORE line. The channel will be stored with the program number you desired.
You have now stored the first channel.
Use the Program up button to select again CHANNEL and continue the tuning procedure until you have tuned in all the programmes you want or the television can receive.
To exit the SETUP menu press the TXT button.
Please note
The system will displayed automatically on SYSTEM row i.e.BG, L, I, DK depending the receiving broadcasting system of the country. In some countries the broadcasting system can be both in BG/DK or BG/LL´.Only the TV sets produced with Pal Secam BG/DK or Pal Secam BG/LL´ systems can receive both BG/DK or BG/LL´ broadcasts.
Please note
If you do not press any buttons for 15 seconds the TV will exit the menu system.
Automatic Tuning (Autoprogram)
Enter the SETUP menu as before.
| SETUP |
CHANNEL | C 26 |
SYSTEM | BG |
FINE TUNE | 0 |
SEARCH |
|
AUTOPROGRAM | |
CHILD LOCK | OFF |
PROGRAM NO | P6 |
STORE |
|
0 | 9 |
| C/S |
NEXT MENU
Use the Program down button to select AUTOPROGRAM and press the OK button.
Please Note:
a)On the TV sets equipped with ATS a COUNTRY SELECTION menu will appear.
Select the desired country using Program and Volume buttons.
Press the OK button to select the country and press the OK button again the Automatic Tuning System regarding the broadcasting system in the desired country.
b)On the TV sets without ATS pressing the OK button starts AUTOPROGRAM.
When you are sure the aerial is connected properly press the OK button and to confirm it press OK button again.
To cancel Autoprogram whilst it is working press the Menu button. As Autoprogram stores a channel it will appear briefly on the screen.
Your TV is now tuned and ready to use.
Please note:
If auto sort fails to arrange the programmes in the required sequence please refer to programme organising. See the Program Organising.
Fine Tuning
Although the search and Autoprogram will automatically try and tune to the best reception, in areas of poor reception a bit of fine tuning may be required.
In the SETUP menu use the Program down button to select FINE TUNING. Use the Volume up and Volume down buttons to fine tune.
When you have finished use the Program down button to select STORE and press the OK button.