10
❻TV set up
The TV set up is accessed through a menu system.
Once you have stored your set up, this is the set up the TV will default to when you switch it on.
Please note
If you do not press any buttons for
There are three menus;
•Picture Menu
•Setup Menu
•Features Menu
•Picture Menu
To reach the picture menu press one time to MENU button.
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
STORE
NEXT MENU
The picture menu allows you to set up the following:
BRIGHTNESS
CONTRAST COLOUR SHARPNESS
To change, for example, the colour, select it using Program down buttons.
Use the Volume up and Volume down buttons to change the setting.
To save your settings, select STORE and press the OK button. STORED will be displayed.
Note:
If you play NTSC formatted tape from the scart, the TINT menu will appear to adjust the TINT level.
• Setup Menu
Setup Menu is explained on the page 8
• Features Menu
To reach the feature menu press three times to MENU button.
| FEATURES |
SLEEP TIMER | OFF |
ON TIMER | OFF |
AVL | ON |
LANGUAGE |
|
| EXIT |
a) Sleep Timer
The sleep timer automatically switches the set to
You can select the time from 15 to 120 minutes with 15 minutes steps.
There are two ways to set the sleep timer;
1- Select the SLEEP TIMER in the FEATURES menu. Select the desired time by using Volume down or Volume up buttons.
2- You can also use the YELLOW ( 
) button on your remote control to select this function. You can increase the switch off time interval by pressing this button repeatedly.
Notes:
The last 60 seconds of the desired switch off time by counting from 
59 down. When this time interval has elapsed the set will switch to
To view the remaining sleep time, press YELLOW ( 
) button. To cancel the sleep time select OFF in SLEEP TIMER.
b) On Timer
You can select the on time between 30 minutes to 12 hours by pressing numeric buttons or AV button.
If TV is at
To cancel the on time select off in ON TIMER.