Setting Up and Displaying Laptop Computers in
Room 111
Instructions on setting up and projecting a laptop computer display in room 111
Please note that most laptops cannot be connected to the network and may not be able to access the Internet. Contact Justin or David for more info.
1.0Initial setup
1.1Be sure to have the dark gray cable which has both monitor and speaker connections on each end, and which is labeled for laptops (kept on the podium in Room 111).
1.2The laptop should be kept on or by the podium so that the cable can easily reach the wall jacks.
1.3Two wall jacks are beneath the white board near the podium; one is labeled CPU 1, the other CPU 2. These are the jacks to connect the projectors to the laptop using the dark gray cable. Either jack may be used.
The wall jacks labeled 101D1 and 101D2 are for network connections and often cannot be used with laptops. Contact Justin or David.
Plug the computer's power cord into the wall outlet to the right of the 101D1 and 101D2 jacks.
1.4Connect one end of the dark gray cable to the back of the laptop. Connect the other end to CPU1 or CPU2, and the speaker port.
1.5Once all cables are connected, turn on laptop.
2.0On PRIMARY CONTROL (Console #1)
2.1Select Power ON (button lit).
2.2Select Ceiling speakers ON (button lit).
3.0On RECEIVER (Console #1)
3.1RECEIVER should be ON (text is shown in display window).
3.2Select SWITCHER button (displayed text: DVD/TV).
