Bluetooth
To use a Bluetooth enabled cell phone with your DS6520/DS6521/DS6522, you must first pair and connect your Bluetooth cell phone(s) with the telephone base. All DS6520/DS6521/DS6522 handsets can be used to make or answer calls on the cell line.
Bluetooth wireless technology operates within a short range (a maximum of approximately 30 feet). When you pair a Bluetooth cell phone to the telephone base, place your Bluetooth cell phone closer to the telephone base to maintain sufficient signal strength. For optimal performance, keep your cell phone within 15 feet of the telephone base while using the cell line.
Pair and connect your first Bluetooth cell phone
. Press and hold 1/ 2 on the telephone base for about four seconds. You hear two beeps and the 
1/ 
2 light blinks.
2.Turn on the Bluetooth feature of your cell phone. Once your cell phone finds your VTech phone (VTech DS6520/DS6521/DS6522), press the appropriate key on your cell phone to continue the pairing process.
•Your cell phone may prompt you to enter the PIN of the telephone base. The default PIN of the telephone base is 0000.
Download directory
. Press MENU when the phone is not in use.
2.Scroll to 
Bluetooth then press SELECT.
3.Scroll to 
Download dir then press SELECT.
4.Scroll to select the desired cell phone, then press SELECT.
• For Android and Blackberry cell phones, you may also download 
your cell phone directory to your DS6520/DS6521/DS6522
via the VTech Contact Share application. Go to www.vtechphones.com/apps/contact_share for application download.
Using the handset menu
. Press MENU when the phone is not in use.
2.Press 
or 
until the screen displays the desired feature menu.
3.Press SELECT to enter that menu.
•To return to the previous menu, press CANCEL.
•To return to idle mode, press and hold CANCEL.
Telephone settings
Default settings are indicated by asterisks(*).
Settings menu | Description | Options |
LCD language | Set the screen display language. | English* |
|
| Français |
|
| Español |
Voicemail # | Set the voicemail number for speed dial. | Voicemail # |
|
| _ |
Clr voicemail | Turn off the voicemail indicators (see the | Reset VM Icon? |
| note below). |
|
|
|
|
Key tone | Turn an audible beep on or off whenever a key | Key tone:On* |
| is pressed. | Key tone:Off |
Home area code | Enter your home area code if you dial only | Home area code |
| seven digits for local calls. | _ _ _ |
|
| |
Dial mode | Set the telephone to be | |
| pulse dialing. | Pulse |
• Use the Clr voicemail feature when the telephone indicates there is new voicemail 
but there is none. For example, when you have accessed your voicemail while away from home. The Clr voicemail feature only turns off the indicators; it does not delete
your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal that turns on the indicators.