PLAYING A DISC
1.PLAYBACK PROCEDURE
EJECT
DVD
Power
(1) Press POWER on the unit or on the remote control to turn on the unit.
・Every time you press POWER, the TV/DVD will starts from previous mode.
(2)Press DVD on the remote control to select DVD mode. ・The DVD startup screen will appear on the screen.
(If DVD disc has already loaded, playback will start automatically.)
(3)Load the disc in the disc slot.
・Load the disc in the disc slot with the label side facing upward. (If the disc has a label.)
Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. ・When you play the 8cm disc, you need an adapter (not supplied),or you will damage the DVD
player.
(4)On the
・Press ►/ ◄ or ▲ / ▼ to select title, then press ENTER. Title is selected and play commences.
(5)Press STOP to end playback.
・The unit records the stopped point, depending on the disc. “► ”appears on the screen. Press ► PLAY to resume playback from the scene point.
・If you press STOP again (“ ” appears on the screen.), the unit will clear the stopped point.
(6) Press ▲ EJECT to remove the disc.
►Note:
・If a
・Some discs may take a minute or so to start playback.
・When you set a
・Some discs may not work the resuming facility.
・Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.
56