Sanyo POA-LN02 owner manual Creating a program file Program Editor, Procedure of making program

Creating a program file [Program Editor]

Creating a program file [Program Editor]

Network Viewer 3 (Program Editor) is a tool to make a program file which specifies the dis- play order of the image and its file path in the file server (FTP server). The Program Editor makes a folder "DispParam" at the login root directory in the FTP server and makes files as each program name into this folder. These files are called "Program". By specifying the pro- gram file with the Network Viewer function, you can have the programmed display with the monitor .

Procedure of making program

1 To launch the Program Editor, click "Network Viewer 3 (Program Editor)" menu from "Start" - "All Programs" - "Network Viewer & Capture 3" menu.

2 Click Connect button.

3 If the connection setting window appears, enter the each item and then click OK button.

The setting window disappears and then the programs are listed on the window if there are program files at the login directory in the connected FTP server.

Item	Description
Host name	Enter the FTP server name or IP address
Root Folder	Specify the root directory of the FTP server. Normally use "/".
User ID	Enter your login account of the FTP sever or use blank when you login as anonymous
Password	account for the FTP server
	Enter your password (PIN code) or use blank when you login as anonymous account.

IMPORTANT

It is required to set the write permission mode for the login directory of the FTP server. If only the read only mode, you will have an error when you register a new program.

LD-NET ORGANIZER

OWNER'S MANUAL

87