Installation and network configuration
When you connect a monitor to a network, the network number of monitor must be the same as the network you intend to connect. You should configure monitors network first. Make sure that the monitor is connected to the network correctly. To configure the net- work, use the computer. Refer to the chart below.
Configure the network with computer | p.22 |
|
|
Temporarily set up the computer's network with the default network number of the
Example of computer's configuration IP Address : 192.168.0.5 Subnet Mask : 255.255.255.0 Default Gateway : (blank) DNS : (blank)
Using the web browser and login to the setting page of the
Change the network address you want to connect to the existing network through the setting menu on the browser.
Restart the
Please see further informatin on pages
Default Network Address of the
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Example of monitor's configuration IP Address : 192.168.1.201 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.1.1 DNS : 0.0.0.0
Completing the network configuration. Perform the basic setting and operation of the monitor by using the web browser. Please see chapter "3: Basic Setting and Operation" on page 29 for further information.
21