Creating the available data [Network Viewer 3]
Setting of output destination and conversion mode
When clicking Change button on the confirma- tion window in the step 3 on the previous page, following option setting window appears.
Output destination
Select either Folder or FTP server as the output destination of the converted files.
Folder
Output folder.....Specify a folder in the local hard disk
or shared computer in the network
FTP server
Host name | Enter host name or IP address of the |
Root Folder | FTP server |
Specify the root directory of the FTP | |
User ID | server. Normally use "/". |
Enter your login account of the FTP | |
Password | sever. |
Enter your password of the FTP server. | |
Output folder | Specify a directory of the FTP server. |
Conversion mode
Resolution.............Selects output image resolution (VGA to SXGA+)
The image resolution higher than the monitor's panel resolution cannot be dis- played.
Image rotation.....Selects image rotation (0, 90, 180, 270).
Conversion Type |
|
Fit | Converts as either width or height of |
| the image sets to be the maximum |
Justify | screen width or height. |
| |
[both ends] | Converts as width of the image sets |
Justify | to be the maximum screen width. |
| |
[top and bottom] | Converts as height of the image sets |
Cut | to be the maximum screen height. |
Cuts image with the screen size not depending on the image size. This type has fol- | |
| lowing mode. |
| Select this mode when you want to have the images with the original size. Select |
| each mode by clicking on the button. |
Image Quality....Selects an image conversion quality with "High", "Mid" or "Low".
85
