Chapter 2 Installation
Configure the network with the computer
This example explains how to set the following configuration.
IP Address | : 192.168.1.201 |
Subnet Mask | : 255.255.255.0 |
Default Gateway | : 192.168.1.1 |
DNS | : 0.0.0.0 |
|
|
The default network configuration is set as follows.
IP Address | : 192.168.0.2 |
Subnet Mask | : 255.255.255.0 |
Default Gateway | : 0.0.0.0 |
DNS | : 0.0.0.0 |
|
|
Make sure that the monitor is connected to the network and then connect the AC cord to the outlet.
1 Temporarily*1 set up your computer network configuration to the same IP network number as the
as follows and restart the computer.
IP Address | : 192.168.0.5 |
Subnet Mask | : 255.255.255.0 |
Default Gateway | : (blank) |
DNS | : (blank) |
|
|
The network configuration of computer differs depending on each network environment or your computer. For further information, please see the chapter “Configure the network of computer” on page 24.
22
*1 Change your computer's network configuration temporarily. After completing the set up for the monitor, you must set up again to the original network configuration for your computer. It is rec- ommended to make a note of those network settings.
