Sanyo POA-LN02 Registering and deleting E-mail addresses, Option selection for sending alert mail

E-mail setting

2Registering and deleting E-mail addresses

Click "Add e-mail address" and type the e-mail address onto the text box and click Set button. To check the registered addresses, click Check/Delete sub menu tab.

The addresses are listed as the figure on the right.

Up to 10 E-mail addresses can be registered.

Check / Delete

To delete the registered addresses, check the address you want to delete and click Delete button.

3Option selection for sending alert mail

Click Option sub menu tab. Check the condition items under which alert mail will be sent and click Set button.

Please refer to item "Examples :Type and contents of alert mail" described on the next page.

[1]––––––––––––––––––––––––––––––––––

When power circuit is failed.

When internal temperature is too high.

When internal fan circuit is failed.

When Panel usage time reaches [ ] hours.

[2]––––––––––––––––––––––––––––––––––

When monitor is turned off.

When power save function turns Monitor off.

When the signal is interrupted. When Auto Play is failed.

Option

If condition "When Auto Play is failed" is checked, the trap is sent when occurring the error during the auto display operation using with the network viewer function ( p.92). For further information of the error, refer to item "Auto Display setting and control page [3]"( p.95).

Up to 99,999 hours can be set for use time.

If condition "When monitor is turned off" is
checked, the trap is sent when the monitor
is turned off except Power/Fan fail, High
temp, Power save.	39
LD-NET ORGANIZER
OWNER'S MANUAL