Sanyo POA-LN02 owner manual Error information, Network Capture, Error messages

Chapter 5 Network Capture

Error information	messages include word "PJ". Here "PJ" means "Monitor".
	Network capture function is for projector originally. So some error
Error messages	Cause and corresponding
	Error when executing the communication. The parameter setting
Set up the parameter.	(host name, capture port) has not been set.
	 Check parameter setting (	p.67)
It has not been registered to	Error when executing Start Communication or Start real time cap-
	ture. The IP address of the computer has not been registered.
monitor as a group.
	 Register the IP address by using the web browser ( p.72)
	Error when executing Start Communication or Start real time cap-
Cannot be displayed as moni-	ture. The other capture, viewer or advanced card imager function
tor is under display.	is now operating.
	 Wait until the communication function is available.
	Cannot establish the connection with the network unit when
Cannot connect to monitor.	executing the Start communication, End communication, Capture
	transfer, Start real time capture or End real time capture.
	 Check connection of the network cable.
	Cannot transfer the data to the network unit when executing the
Cannot transfer data to moni-	Start Communication, End Communication, Capture transfer, Start
	real time capture or End real time capture. The time out period is
tor.
	10 seconds.
	 Check connection of the network cable.
	Cannot receive the data from the network unit when executing
Cannot receive data from mon-	the Start Communication, End Communication, Capture transfer,
	Start real time capture or End real time capture. The time out
itor.	period is 10 seconds.
	 Check connection of the network cable.
Other PC has authority.	When executing the End communication, you cannot quit the
Cannot complete "Network
	communication because other computer has an authority
Communication".
Other PC has authority. Cannot	Other computer has an authority.
obtain authority.
The server name or address	When setting the parameter, the computer cannot find the set-
	ting host name or IP address in the network.
could nt be resolved.
	 Use available host name or IP address.
	When setting the parameter, the reserved port number is speci-
Invalid port number	fied.
	 Check parameter setting (	p.67)
Monitor has not started Network	The monitor might have turned off during the communication.
Communication. Close the window
	 Check monitor power and restart executing "Start communication".
and open it again.

80