Sceptre Technologies Sceptre X42 TV Info Explained, Source PC & AV Explained, Dtv, HDMI-1, Page19

TV Info Explained

Non DTV	On the upper left hand corner there’s always an “M: “and an “S:”. “M:
	“ represents the main display while “S: “represents the sub-display also
	known as PIP window. “S: “is usually off because a PIP window is not
	present.
DTV	On the top 1/3rd of the screen a information bar would appear, the information
	displayed would include what program you’re watching, what time slot is the
	program playing in and what format is the program being displayed in.

Source PC & AV Explained

DTV	For ATSC tuner use only. ATSC tuner is a high definition over the airwave
	tuner that uses a high definition antenna to tune to local channels. If your
	local channel broadcasts in high definition this tuner will display high
	definition picture on the TV.
HDMI-1	HDMI stands for High Definition Multimedia Interface. This type of

HDMI-2 connection is designed so that 1 single cable can handle both high definition digital video and audio at the same time. To view video and listen to audio with this source you must have a HDMI to HDMI cable. This type of connection is primarily used by satellite or digital cable boxes and up conversion DVD players.

HDCP-1 HDCP stands for High-bandwidth Digital Content Protection. This type of HDCP-2 function is designed so high definition video cannot be copied while hooked

up to a recording device. HDCP is enabled in HDMI and in HDCP DVI mode. This type of connection is primarily used by satellite or digital cable boxes and up conversion DVD players. Please note to get sound out of HDCP mode you must connect an audio cable from your audio video device to the audio port labeled “PC Audio In”.

DVI-1 DVI stands for Digital Video Interface. This type of connection is designed so

DVI-2 video can be digitally transferred to the television therefore display the colors

SCEPTRE X42 Page19