Sceptre Technologies Sceptre X42 specifications Page79

Problems	Possible solutions
Blinking picture
accompanied	Check the connection of antenna/signal cable
by signal box image
Broken lines or	Adjust antenna. Keep the TV away from noise sources such as
segments	neon lights, and hair dryer.
Certain TV channels
	Please use the channel scanning function or v-chip function to
are
	unblock.
blocked
	￿Make sure your Picture / Sound are both on “User Mode” by
Can not access a
	pressing the “Picture” button until the upper left hand corner
picture or
	says “User Mode”.
audio menu	￿Please do the same regarding “Sound” button
Cannot view 2 channels
	The PIP function is not designed to view 2 channels at the same
at the
	time.
same time with PIP
	This television is designed with SONY television universal
Universal Remote Code
	remote codes.
	￿This is a big LCD screen, it takes time for electricity to charge
	up to power the screen and takes time for the large screen to
	deplete all it’s residual electricity.
TV has colors of lines	￿Please do not turn the TV on and off really quickly.
across the screen	￿Between the time which you turn off the TV and the time
	which you turn it on, there should be at least 50 seconds to 70
	seconds.
TV is turned on, stand	￿This is a big LCD screen, and needs time to warm up to show
by light is green but no	the picture.
picture	￿Please wait for 15-30 seconds for the picture to show up.
No Picture on PC (DVI	￿Is your video card’s DVI port turned off by default?

SCEPTRE X42 Page79