Connecting to a PC with HDMI…
1.Make sure the power of UHD TV and your PC is turned off.
2.Obtain a HDMI 2.0 cable; connect to the HDMI output of your PC and the other end to the HDMI 1 port on the back of your UHD TV.
3.Turn on the power of the UHD TV and your PC.
4.Use the remote control’s source button or the source button on the TV to switch to HDMI1.
5.Change your PC resolution to 3840 x 2160 at 60 Hz refresh rate.
Please Note:
∙For the best results, please set your PC resolution to
3840 x 2160 at 60 Hz. Please refer to the PC or graphic card’s manual for further instructions on how to set your resolution and refresh rate.
∙Please refer to your PC manual for video output requirements of the video card.
- 21 -
www.SCEPTRE.com
SCEPTRE U50 UHD TV User Manual