Video Please Note | Sceptre Technologies E24 Series guide

8.SPDIF - This connection port is used for sending out digital audio signals to digital surround sound receivers. The orange (COAX SPDIF OUT) connector sends out either bit-stream or PCM digital sound signal to a home theater receiver with digital coax input.

9.HDMI2 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device for video.

10.YPbPr – This connection port is for DVD players or satellite / cable set-top boxes that use component cables. From left to right, connect green, blue, and red for video, and then connect white for left channel audio, and red for right channel audio. This connection shares audio red / white jacks with

Video.

Please Note:

•This TV features a power saving function which will turn off the TV automatically after 10 minutes of idling on a connection with no signal. This feature is present on all connection.

Installing Batteries to the Remote Control

Please insert two AAA batteries into the remote control. Make sure that you match the

(+)and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the battery cover.

Please note:

•Only use AAA batteries.

•Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.

•Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to personal injury.

•Dispose the batteries in accordance with local laws and regulations.

•Keep the batteries away from children and pets.

•If the remote control is not used for a long time, remove the batteries.

•Keep the remote control away from moisture, sunlight, and high temperatures.

- 14 -

www.SCEPTRE.com

SCEPTRE E24 Series LED HDTV User Manual