Sceptre Technologies E24 Series Opening the Package, E24 Package Contents, Installation

Page 7

Opening the Package

The SCEPTRE TV is packaged in a carton. Any standard accessories are packed separately in another carton. The weight of the TV is approximately 9 lbs. Due to the size and weight of the product, it is suggested that it must be handled by a minimum of 2 or more persons. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding. When opening the carton, check that the product is in good condition and that all standard accessories and items are included. Save the original box and all packing materials for future shipping needs.

E24 Package Contents

SCEPTRE TV Display x 1

TV Stand x 1

User Manual x 1

Warranty x 1

Quick Start Guide x 1

Screw x 3

Screw Driver x 1

TV Remote Control (AAA Battery included) x 1

Installation

Please read the user manual carefully before performing the installation. The power consumption of the display is approximately 28 watts. Please use the power cord designated for the product. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated. The product should be installed on a flat surface to avoid tipping. Space should be maintained between the back of the product and the wall for proper ventilation. If you would like to mount the TV onto the wall, please see page 8, and 10 for additional information. Avoid installing the product in the kitchen, bathroom or other places with high humidity dust or smoke, so as not to shorten the service life of the electronic components. Please ensure the product is installed with the screen in landscape orientation. Any 90° clockwise or counterclockwise installation may induce poor ventilation and successive component damage.

- 7 -

www.SCEPTRE.com

SCEPTRE E24 Series LED HDTV User Manual

Image 7
Contents Dear Sceptre Customer Important Information Safety Instructions Safety Instructions Page External Television Antenna Grounding Television Antenna Connection ProtectionInstallation E24 Package ContentsOpening the Package Attaching or Removing the Stand Page Table of Contents Front View Identifying Front and Rear PanelRear View Mounting Pattern Following descriptions are from left to right Top Control ButtonsRear View Connections Video Please Note Installing Batteries to the Remote ControlSceptre E24 Remote Control Page If You Have Digital Cable without Cable Box or Antenna… Connection SuggestionsConnecting Cable Box with Component YPbPr… Connecting Wii with Composite… Connecting Satellite boxes with HDMI… Connecting to a PC with VGA and 3.5 mm minijack … Switching Sources Starting up the Hdtv Ready to Watch Some TV?If You’ve Connected Antenna or Cable to the TV… OSD On Screen Display Controls Via Remote ControlVia TV Top Panel Buttons Picture OSD On Screen Display OptionsPicture Settings Advance Picture Settings Sound Other Settings Channel Parental Setup III. Clock Others USB Connection Explained Detailed ExplanationsMedia Setting Rating Explained Closed Captioning digital and analog ExplainedMpaa Normal Aspect Ratio ExplainedTo ADD to the Favorite List Shortcuts to Browsing ChannelsCleaning the bezel and remote control How do I clean the TV ?Problems Solutions TroubleshootingTV Channels are Switching a Call Us If You Need Help Display panel Illustration Specification4NTSC/ATSC Limited Product Warranty Warranty Service Disclaimer, Trademarks, & Copyright Information European Notice FCC Compliance Statement