Sceptre Technologies E24 Series user manual TV Channels are

Page 43

Problems

Solutions

TV CHANNELS ARE

Check your auto lock function’s settings inside the OSD. You

BLOCKED

may have locked up some channels but forgot about them.

 

Refer to page 31 for more instructions.

UNIVERSAL

This TV follows SONY’s universal remote code. Please check

REMOTE CODE

your hand book for SONY’s codes then apply them.

THE TV TURNS ON

This TV is a High Definition liquid crystal display panel TV. It

OR OFF SLOWLY

requires a few more seconds than normal TVs to power up and

AND THE SCREEN

show the picture.

SHOWS UP

 

SLOWLY

 

NO SOUND ON PC

Make sure you have a 3.5 mm mini-jack cable connected from

 

your pc’s sound output to the TV’s VGA STEREO INPUT.

HDCP VIDEO SAYS

Reboot your HDCP video device but turning them off and

NO HDCP SUPPORT

unplugging the power cord. Wait up to 8 minutes to plug the

 

power back in to see if it works or not.

 

Make sure you have a 3.5 mm mini-jack cable connected from

HDCP VIDEO HAS

your HDCP video device’s sound output to the TV’s VGA

NO AUDIO

STEREO INPUT. If your HDCP video device uses RCA AUDIO

 

jacks, you’ll need to obtain a RCA audio converted into 3.5 mm

 

mini-jack cable.

CANNOT GET

Make sure the TV is recognized as plug and play monitor. Try

1920X1080 ON PC

updating your video card’s drivers as well. If that does not help,

VGA

most likely you’ll need to upgrade your video card to a newer

 

one.

PICTURE IS

This might be from interference from large electrical appliances,

DISTORTED OR

cars, motorcycles, or fluorescent lights. If the TV is close to the

HAS ABNORMAL

wall, try moving the TV to another room in your house to see if

SOUND

the problem still occurs.

 

If you’re using HDMI or a TV digital channel make sure you use

 

the ASPECT button to switch to 16:9 format. If you are using

 

VGA, use the AUTO ADJUST function to adjust to the screen.

PICTURE DOES

Please Note : If you are using regular analog TV, AV, or

NOT COVER THE

component in 480i resolution, use the ASPECT button to switch

ENTIRE SCREEN

to 16:9 in order to fill up the screen. Please Note : This note

 

this feature will distort the picture.

 

For best image quality, view HD widescreen programs where

 

possible. If HD content is not available view “Standard

PICTURE QUALITY

Definition” from a digital source. Standard, analog TV will

IS HORRIBLE!!

always be noticeable inferior to HD because your TV has video

 

that is many times better than old TV’s and so you can see

 

interference and deficiencies you did not KNOW you had.

PICTURE HAS

Your TV is manufactured using an extremely high level of

PIXELS THAT ARE

precision technology, however, sometimes some pixels of your

ALWAYS

TV may not display. Pixels defects within industry specifications

DISPLAYING THE

are inherent to this type of product and do not constitute a

SAME COLOR

defective product.

I CANNOT CHANGE

Your TV syncs time automatically according to your local TV

THE TIME

channel. This function only works while the TV’s tuner is

MANUALLY

connected to an ANTENNA.

BIG BLACK BOX IN

You have turned on closed captioning and are using TEXT1 –

THE MIDDLE OF

TEXT4. Change the setting to CC1 or turn off closed captioning

SCREEN

and the box will disappear. Refer to page 33 for more

 

information.

- 43 -

www.SCEPTRE.com

SCEPTRE E24 Series LED HDTV User Manual

Image 43
Contents Dear Sceptre Customer Important Information Safety Instructions Safety Instructions Page External Television Antenna Grounding Television Antenna Connection ProtectionInstallation E24 Package ContentsOpening the Package Attaching or Removing the Stand Page Table of Contents Front View Identifying Front and Rear PanelRear View Mounting Pattern Following descriptions are from left to right Top Control ButtonsRear View Connections Video Please Note Installing Batteries to the Remote ControlSceptre E24 Remote Control Page If You Have Digital Cable without Cable Box or Antenna… Connection SuggestionsConnecting Cable Box with Component YPbPr… Connecting Wii with Composite… Connecting Satellite boxes with HDMI… Connecting to a PC with VGA and 3.5 mm minijack … Switching Sources Starting up the Hdtv Ready to Watch Some TV?If You’ve Connected Antenna or Cable to the TV… OSD On Screen Display Controls Via Remote ControlVia TV Top Panel Buttons Picture OSD On Screen Display OptionsPicture Settings Advance Picture Settings Sound Other Settings Channel Parental Setup III. Clock Others USB Connection Explained Detailed ExplanationsMedia Setting Rating Explained Closed Captioning digital and analog ExplainedMpaa Normal Aspect Ratio ExplainedTo ADD to the Favorite List Shortcuts to Browsing ChannelsCleaning the bezel and remote control How do I clean the TV ?Problems Solutions TroubleshootingTV Channels are Switching a Call Us If You Need Help Display panel Illustration Specification4NTSC/ATSC Limited Product Warranty Warranty Service Disclaimer, Trademarks, & Copyright Information European Notice FCC Compliance Statement