TechniSat Integrated IRDETO instruction manual Setting the UHF Output Channel

Page 10

4.4 Setting the UHF Output Channel

The procedure is as follows:

>Use the Menu key to select the Main Menu

>Now select the entry Settings, marking it in blue by using the up/down arrow keys

>Confirm by pressing OK

The sub-menu Settings will be displayed.

>Now use the up/down arrow keys to mark the line Audio/Video Settings

>Confirm by pressing OK.

The sub-menu Audio/Video will be displayed

>Now select the line UHF Out Channel, marking it in blue by using the up/down arrow keys.

>Select a free UHF channel on your TV set in the range between 21 and 69.

>Finally, use the numeric key pad to enter the new output transmission channel in your receiver's memory.

The receiver will now transmit the signal on the UHF channel shown in the display. Should you still experience interference on the channel selected, please repeat the procedure until you find a suitable channel, free from interference.

10

Image 10

Contents DigiBox Irdeto Remote control MONO1/MONO2Contents Page Al antenna Please read this first Important hints on UsageSafety Instructions Equipment not in useConnecting a DVB receiver to a satellite installation Mains connection External InstallationConnections Connection to a Television setSetting the UHF Output Channel Amplifier Video Cassette Recorders VCRSuper VHS Video Cassette Recorders Serial Interface RSBasic Settings InstallationOSD Language GMT Time Offset hrs Audio/Video SettingsParental lock CountryScreen Format TV Adjustments for the External Unit SubtitelAdjusting the Switching Matrix and LNB Properties Switching DiSEqC on or offAdditional Settings Poor reception, digital reception not possible Operation Switching on and offProgramme Selection Selecting a different language Adjusting sound volumeReception of scrambled encrypted Programmes Selecting blocked programmesDisplaying Time and Programme Information TV/Radio selectionReturn to previous programme selected Additional Programme InformationEntering EPG data Electronic Programme GuideEPG functions allow you to Interrupting EPG downloadNext Now Display of current programme contentsPreview EPG Information Activate VCR Timer modeEPG Functions Preselect ProgrammesEPG Survey EPG Search Programming the Timer Timer on Changing the Basic Programming VCRAdding/Deleting Channels Deleting items from the User List Sorting ChannelsAdding items to the User Channel List Deleting items from the Total ListChange PIN Locking ChannelsProgramming the Electronic Programme Guide Page Unblocking the parental lock for individual channels Programme SearchPage Page Activate factory settings/change data channels Page System Configuration Embedded IrdetoTechnical Terms Mode Software updateLNB/LNC Low Noise Block converter Modulation at 22 KHzTransponder Universal LNBTechnical Data Remote Control System RC-5 LNB power supplyTimer Serial Interface RSProblem Possible Cause Solution Troubleshooting GuidePower supply Mains switch Power usage Mains voltageHOT Using the up/down arrow keys Summary for everyday use Switching on and offVolume adjustment Using the programme/channel list