TechniSat Integrated IRDETO instruction manual

Page 34

>In order to search for programmes, press the Menu key to display the Main Menu.

>Use the up/down arrow keys to mark the entry Search.

>Confirm with the OK key.

The sub-menu >Search will be displayed.

>Use the arrow keys to select the search mode to be used.

>Press the OK key to display the relevant sub-menu.

7.7.1 All

When this search mode is activated, all satellites and transponders available in the system will be scanned. At the end, new programmes will be displayed in red type in the program- me/channel list.

>Use the up/down arrow keys to select the All option.

>Confirm with the OK key.

The legend "Start search" will appear on the display.

>Press OK again to start the search

>The search can be terminated at any time by pressing OK. It is quite likely that a full scan may take 15 minutes or longer. Please note any notes and information displayed on the screen.

7.7.2 Satellite

This search mode can be used to search a specific satellite. All other satellites will be ignored in this mode.

>Use the up/down arrow keys to select the Satellite option.

>Confirm with the OK key.

The legend "Start search" will appear on the display.

>Before proceeding further, you will still have to select the satellite to be scanned. Press the OK key.

A selection window will appear with the four available satellite positions.

>Use the up/down arrow keys to select the satellite.

34

Image 34
Contents DigiBox Irdeto Remote control MONO1/MONO2Contents Page Al antenna Please read this first Important hints on UsageSafety Instructions Equipment not in useConnecting a DVB receiver to a satellite installation Mains connection External InstallationConnections Connection to a Television setSetting the UHF Output Channel Amplifier Video Cassette Recorders VCRSuper VHS Video Cassette Recorders Serial Interface RSBasic Settings InstallationOSD Language GMT Time Offset hrs Audio/Video SettingsParental lock CountryScreen Format TV Adjustments for the External Unit SubtitelAdjusting the Switching Matrix and LNB Properties Switching DiSEqC on or offAdditional Settings Poor reception, digital reception not possible Operation Switching on and offProgramme Selection Selecting a different language Adjusting sound volumeReception of scrambled encrypted Programmes Selecting blocked programmesDisplaying Time and Programme Information TV/Radio selectionReturn to previous programme selected Additional Programme InformationEntering EPG data Electronic Programme GuideEPG functions allow you to Interrupting EPG downloadNext Now Display of current programme contentsPreview EPG Information Activate VCR Timer modeEPG Functions Preselect ProgrammesEPG Survey EPG Search Programming the Timer Timer on Changing the Basic Programming VCRAdding/Deleting Channels Deleting items from the User List Sorting ChannelsAdding items to the User Channel List Deleting items from the Total ListChange PIN Locking ChannelsProgramming the Electronic Programme Guide Page Unblocking the parental lock for individual channels Programme SearchPage Page Activate factory settings/change data channels Page System Configuration Embedded IrdetoTechnical Terms Mode Software updateLNB/LNC Low Noise Block converter Modulation at 22 KHzTransponder Universal LNBTechnical Data Remote Control System RC-5 LNB power supplyTimer Serial Interface RSProblem Possible Cause Solution Troubleshooting GuidePower supply Mains switch Power usage Mains voltageHOT Using the up/down arrow keys Summary for everyday use Switching on and offVolume adjustment Using the programme/channel list