Apex Digital AT2702, AT2402, AT2002 instruction manual Timer Menu, On Time, On Channel, Off Time

Page 18

Standard - AT1302, AT2002, AT2402, AT2702

FUNCTIONS & FEATURES (continued)

Timer Menu

From the Main Menu screen, press the “Menu” key on the remote control until “Timer” on the main screen is highlighted in red. Press the left or right arrow key to enter this menu.

Time

This feature allows you to set the clock on the TV. With “Time” highlighted in red, use the left & right arrow keys to set the hour. Once the hour has been set, press the down arrow key to move to minutes, and then set them as well. Repeat this process for the AM/PM aspect also. Please note that on some models, the number “0” is used instead of “12.” Press the down arrow again to move on to the next feature, or simply let the display disappear after six seconds.

On Time

This feature will allow you to program the TV to turn on at a preset time, and to a preset channel (see “on Channel”, below.) Use the down arrow key to highlight this feature in red. Next, use the left & right arrow keys to set the hour that you wish for the TV to come on. Use the down arrow key to move to minutes, and then set them using the left & right arrow keys to set them as well. Repeat this process for the AM/PM aspect also. Please note that some models use the number “0” instead of “12.” Press the down arrow to move to the next feature, or simply let the display disappear after six seconds. Please note that the timer needs to be set up each time you wish it to come one.

Timer

Time

On Time

Cn Channel

Off Time

Timer

Time

On Time

Cn Channel

Off Time

On Channel

This feature ties into the “On Time” feature described above. Use the down arrow key to highlight this feature in red. Next, use the left & right arrow keys, or the numeric keypad, to set the channel that the TV set will be on when the timer activates. Press the down arrow key to move to the next feature, or simply let the display disappear after six seconds.

Off Time

The procedure to set this feature is the same as the procedure described above in “On Time.” Use the down arrow key to highlight this feature in red. Next, use the left & right arrow keys to set the hour that you wish for the TV to turn off. Use the down arrow key to move to minutes, and then set them using the left & right arrow keys to set them as well. Repeat this process for the AM/PM aspect also. Please note that some models use the number “0” instead of “12.” Press the down arrow to move to the next feature, or simply let the display disappear after six seconds.

Timer

Time

On Time

Cn Channel Off Time

Timer

Time

On Time

Cn Channel

Off Time

16

Image 18
Contents AT Monaural Color Televisions For Service Call 800-4-APEX-INC Table of Contents Safety Precautions Precautions Before YOU BeginAntenna Setup FCC Warning Feature Descriptions AT1302 AT2002 AT2402 AT2702AT1302 Front panelRear panel AT2002 Front panel Side panelAT2402 AT2702 Keypad TimerFunction 100+Installation Installation Connecting A/V EquipmentAdjusting the Volume Tuner ModeVideo Mode Muting the VolumePicture Menu Functions & FeaturesFunction Selection Menus Tuner MenuOn Time Timer MenuTime On ChannelSystem Menu LanguageBlue Background Mpaa Rating Grid Parental GuideTV Rating Grid Pass Code MenuOther Useful Remote Control Features Child LockTroubleshooting Guide AT1302, AT2002, AT2402, AT2702