Matsui America MAT7DB2656E instruction manual Basic Operations, Config, Clear Data

7. OPERATION

MAKE SURE ALL THE EQUIPMENT AND AC ADAPTOR ARE CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE OPERATION.

7-1 ENTER

-Connect the external aerial (antenna) to the antenna aerial located on the back of the unit. -Switch the unit to on.

-Press TV /RADIO button to enter TV/ RADIO mode. You also can switch between modes by pressing the FUNCTION button.

Note: If there is no signal or the signal is too weak , the screen may be black or distorted .

7-2 BASIC OPERATIONS

SELECT WANTED PROGRAM

1.Press CH - button to enter next channel.

2.Press CH + button to enter previous channel.

3.Press number buttons on the remote control directly to select programme numbers 0 - 9. 4.To select two numbers, press the “-/--” button and choose the “--”mode, then enter enter

your programme numbers.

VOLUME CONTROL

Press the V+ or V- to adjust the volume .

NOTE: The level of VOLUME and BALANCE can be adjust from 0-24.

MUTE CONTROL

Press the MUTE button to mute the sound, press MUTE again or the V+ button to switch the sound ON again.

TFT MODE

Press TFT MODE button, the screen will display:

12

CHAPTER 7 OPERATIONS

Config

In the main menu, you can press the left or right button to select the Config icon . In this menu, you can select Clear Data, TV Setting, Set Time, System Update or System Information .

Clear Data

In Config menu, you can select Clear Data item.

17