Logging in equipment

TV menu

Standard settings Picture

Sound zap2text Connections

Settings

Stations

AV settings Child lock On-screen displays Timer functions Time and date other ...

Stations

Automatic search

Manual adjustment

Sort Delete Enter/change name Preferred stations

Manual adjustment

Operating additional equipment

You have already logged in and connected all connected devices (video recorders, camcorders, DVD players, DVD recorder , Loewe audio system, Pay-TV decoders, Loewe home automation, door intercom) with the connection wizard when you put it into operation for the first time. If you want to connect further or different devices, you have to call the connection wizard in the TV menu – ”Connections”.

Connecting VCR equipment

In addition to the connection via the Euro-AV socket, you also have to connect the antenna (only for antenna or cable systems) through the VCR to the TV set. The antenna signal is then available both to the tuner in the VCR and the TV tuner.

Search for and store the VCR channel (if there is no Euro AV cable)

Switch on the test channel on the VCR or insert a recorded tape and start playback.

Then launch programme 0 on the TV set (set ex- factory to channel 36). Select the first menu item (VCR) in the AV selection list.

To prevent ”normal” TV channels being found in the search, pull out the antenna plug from the antenna input of the VCR temporarily (the plug attached to the cable to the antenna system).

Launch the TV

M menu

Mark ”Settings”

OK Launch

Mark ”Stations”

OK Launch

Mark ”Manual

					DIG IN
SAT	RC5/RC6	SERVICE			1
	IR				2
		CTRL
SAT A/D		VGA			DIG OUT
		AUDIO IN	AV1	AV2/RGB AV3
			R
		AUDIO	OUT
	VHF/UHF		L
					SUR
				C	R

setting”

Manual adjustment
Range	UHF
Channel	E37 (E21...E69)
Frequency	599.25 MHz
Name	VIDEO
TV stand.	B/G
Col. st.	Autom.

Search for channel (blue button)

When the channel is found:

	0-9:Entry	i	Info
O K	Search	M	Back
	Store	E	End

Store (red button)

A list of the stored channels is displayed

Store
0	VIDEO	9	S–RTL	18	KIKA
1	ARD	10	N–TV	19	PHOENIX
2	ZDF	11	DSF	20	EUROSPRT
3	SAT.1	12	TM3	21	KABEL 1
4	RTL	13	PRO7	22	MTV
5	VOX	14	RTL 2	23	CNN INT.
6	S–RTL	15	WDR 3	24	HOT
7	N–TV	16	BR 3	25	TV 5
8	DSF	17	HR 3	26	VIVA
					i	Info
O K	Insert station				M Back
	Overwrite station				E	End
	Overwrite station

Overwrite programme (pro- gramme 0 marked)

EHide menus

Plug the antenna plug back into the VCR.

If you now get interference because a TV chan- nel is transmitting on the same channel as the VCR channel, you have to change the transmit- ting channel on the VCR (see operating instruc- tions of the VCR) and search for the VCR chan- nel on the TV again .