Video playback

Operating additional equipment

In order to see the VCR picture on your TV and hear its sound you have several possibilities:

1.You can use the Euro-AV sockets on the TV set and on the VCR. This is the best option of all – good picture and sound quality.

If you are playing back from a VCR with Digital Link Plus, the VCR picture is shown on the current channel slot.

If you are playing back from a standard VCR, DVD player or camcorder, select the AV socket to which the video signal is connected in the AV selection list or the channel table. Video recorders emit a switching voltage during playback which the TV set can decode (can be activated for every VCR in the con- nection wizard). Then the VCR picture is shown on the current channel slot as in Dig- ital Link Plus VCR’s.

2.You use the antenna connection between the VCR and the TV set. The sound is only broad- cast in mono. To do this, select the first menu item, e.g. VCR, in the AV selection list.

Launch the AV channel via the AV selection

0 Launch AV selection list

AV Selection VIDEO AV1 AV2 AV3 AVS

Select AV socket or VIDEO for

VCR transmitter.

Now you will see the playback from the con- nected AV unit.

Launch the AV channel via the channel overview

OK Launch the channel table

Channel overview: TV			Numerical
	AVS	6	S–RTL
	AV3	7	N–TV
	AV2	8	DSF
	AV1	9	TM3
0	VIDEO	10	PRO7
1	ARD	11	RTL 2
2	ZDF	12	WDR 3
3	SAT.1	13	BR 3
4	RTL	14	HR
5	VOX	15	MDR 3

0 ... 9 Select program:

	Select and	Change programs	i	Info
O K	press OK to proceed	Favourite programs	M	Menu
		Change sorting	E	End

In the numerical sorting you will always find the AV sockets at the top of the list without channel numbers.

Mark the AV socket

Now you will see the playback from the con- nected AV unit.