Loewe 32 HD/DR+ manual IR Link, Video playback, Calling an AV in the station table

Operating additional equipment

Video playback

There are several ways to see the picture and hear the sound of the VCR, DVD player or camcorder on your TV:

1.Use the Euro-AV sockets on the TV and VCR. This is the best way to get a good picture and sound quality. For camcorders and digital cameras it is best to use the front sockets AVS.

If you are playing back from a VCR with Digital Link Plus, the VCR picture is shown on the current station slot.

If you are playing back from a standard VCR, DVD player, camcorder or digital camera, select the AV socket to which the video signal is connected in the AV selection list (button 0 AV) or the station table.

Video recorders emit a switching voltage during playback which the TV set can decode (can be activated in the connection wizard or set Settings Ð AV Settings Ð Allow switching voltage to ÓYesÓ in the TV menu). Then the VCR picture is shown on the current station slot as in Digital Link Plus VCRÕs.

2.You can also control logged-in Loewe VCRs and DVD players with the video menu bar. See page 18 for more details.

3.Use the antenna connection between the VCR and the TV. The sound is only transmitted in mono. Select the first menu item, e.g. VIDEO, in the AV selection.

Calling an AV program in the AV selection list

AV Call AV selection list

AV Selection VIDEO AV1 AV2 AV3 AVS

OK	Select AV socket or VIDEO for
	VCR station.

Now you will see the playback from the con- nected AV unit.

Calling an AV in the station table

OK		Call the station table
	Channel overview: TV					Numerical
		AVS	6 S–RTL
		AV3	7	N–TV
		AV2	8	DSF
		AV1	9	TM3
	0	VIDEO	10	PRO7
	1	ARD	11	RTL 2
	2	ZDF	12	WDR 3
	3	SAT.1	13	BR 3
	4	RTL	14	HR
	5	VOX	15	MDR 3
			0 ... 9	Select program:
		Select and			DR archive	INFO Info
	OK press OK to proceed				Change programs	MENUMenu
					Favourite programs	END End
					Change sorting

In the numeric sorting you will always find the AV sockets at the top of the list without station num- bers.

OK Mark the AV socket

IR Link

Your TV set has a socket for an IR Link (IR) and a cable with a jack and IR emitting diode is also supplied.

This enables you to control most other remotely controlled devices, such as a concealed d-Box or a video from a different manufacturer, by using the TV setÕs remote control. Insert the jack of the infrared emitting diode cable into the IR socket on the back of your TV. The infra- red emitting diode on the end of this cable must be placed in front of the concealed device. For transmission, the TV must be switched on. You can order a nap strip from your dealer (Loewe spare parts no. 29337.001) to help lay the cables. The burl tape is self-adhesive; re- move the protective film. Affix the burl tape on the wall of the shelf or cabinet and press the cable into the burl tape. The burl tape can be split Into several pieces using a knife. To oper- ate the concealed video recorder, point the infrared remote control at the TV set.

OK Call the marked AV socket

Now you will see the playback from the connected

AV unit.

20

BAQ2550H_31310_021_4_GB 20 22.07.2004, 10:15 Uhr