Loewe 32 HD/DR+ manual What to do when, Problem Possible cause Remedy

What to do when...

Problem	Possible cause		Remedy
Various menu items cannot be called (shown in	ÓSimplified controlÓ activated in main information		Deactivate ÓSimplified controlÓ in the main infor-
gray) or the menus for the EPG and teletext			mation. Press the INFO-button, select ÓSelect
modes of operation cannot be called			control levelÓ and call with OK. Set the ÓSimplified
			controlÓ to ÓnoÓ.
Record and Timer are not displayed in the video	No VCR or DVD recorder logged in and no digital		Log in VCR in the TV menu Ð Connections.
menu	recorder installed
ÓConnectionsÓ for example cannot be called in	a)	A timer recording is currently in progress	a)	Wait until the timer recording has ended or
the video menu (grayed out)				clear the timer
	b)	You are recording from the TV set with the	b)	Wait until you stop recording
		video bar
The ÓStationsÓ item in the TV menu and the	The child lock is activated. If these menus were		Deactivate program-related child lock: Switch off
ÓAutom. channel searchÓ item in the main infor-	accessible, children could still set the programs.		child lock or enter PIN in the TV menu Ð Settings.
mation cannot be called
Control of the Loewe VCR with the video control	a)	The VCRÕs Digital Link function is not activated	a)	Activate Digital Link in the VCR
bar and the timer does not work or does not		or not possible		(see operating instructions of the VCR)
work properly	b)	Euro-AV cable not connected	b)	Connect the Euro-AV cable
	c)	Video recorder not logged in	c)	Log in the VCR
General problems with connecting external	a)	The device is not logged in in the ÓConnec-	a)	Compare the connection diagram with the
devices through an AV input		tionsÓ menu or is connected differently to		actual installation in the ÓMain informationÓ
		shown in the connection diagram		under ÓConnectionsÓ and connect as shown
				if necessary
	b)	The AV norm is set incorrectly	b)	Set the correct norm
	c)	The AV signal is set incorrectly	c)	Set the correct AV signal
			If ÓAutomaticÓ is set for AV norm or AV signal, this
			can lead to wrong detection in the case of non-
			standardized signals. In this case the norm and
			signal must be set according to the operating
			instructions of the external device.
Picture shifted horizontally	The TV set is in the Southern hemisphere		Set the horizontal position:
	(e.g. Australia, South Africa)		a)	Call the main information with INFO
			b)	Call Index Ð Set picture Ð Horizontal displace-
				ment
			c)	Set horizontal picture position

23

BAQ2550H_31310_021_4_GB 23 22.07.2004, 10:15 Uhr