Metz 42TN92 manual Feature menu

Page 15

Dynamic Bass

Dynamic Bass is used to increase bass ef- fect of the TV set.

By pressing a / b button, select Dynamic Bass. By pressing _ / ` button set Dynamic bass to Low, High or Off. It is not recom- mended to select High if listening at high volume levels. There is a subwoofer output that can accept an active subwoofer if you wish to create very high levels of Bass.

Subwoofer is active only if Dynamic Bass is set to Off.

SubWoofer

It is possible to connect an external, active subwoofer to the set to give a much deeper bass effect.

By pressing a / b button, select Subwoofer. Subwoofer can be set to On or Off.

Dynamic Bass is not available if Subwoofer is set to On.

Set Subwoofer to On when you connect an external subwoofer to the set.

3D Panorama

This function creates a 3-dimensional sound by using your 2 existing loudspeak- ers on your TV set. It does not need any ad- ditional center or surround speakers. You must be close to your TV set (about 3 meters) and be in front of it to hear the 3D Panorama effect better.

If 3D Panorama is set to on, equalizer, AVL and effect become inactive and can not be accessed.

Feature menu

By pressing _ / ` button, select the third icon. Feature menu appears on the screen.

FEATURE

 

 

Sleep Timer

Off

 

Child Lock

Off

 

Language

English

 

Ext-2 Out

EXT - 1

 

Default Zoom

Panoramic

 

Menu Background

Translucent

 

Menu Timeout

30 sec

 

Teletext Language

West

 

Screen Saver

 

 

 

 

 

 

 

 

Sleep Timer

By pressing a / b button, select Sleep Timer. The timer can be programmed be- tween Off and 2 hours in steps of 10 min- utes by pressing _ / ` button. If sleep timer is activated, at the end of the selected time, the TV automatically goes into stand-by mode.

Child Lock

You can use this feature to prevent children from turning the TV on or changing pro- grams or adjustments etc. without remote control.

The child lock feature can be set by _ / ` but- ton to either on or off. When off is selected, there will be no difference in the operation of your TV. When on is selected, the TV can only be controlled by the remote control handset. In this case the control panel but- tons, except the Power on/off button, at the bottom of the TV will not work. If one of these buttons is pressed, “Child Lock On” will be displayed on the screen.

Language

By pressing a / b button, select Language. By pressing _ / ` button, you can select the language.

- 45 -

Image 15
Contents Plasma-TV-Set 42 PIP 42 TN92 Contents Remote control handset RK18 Plasmatv Subwoofer Out Assembling The Speakers Optional Installation Of Plasma Panel To The Wall OptionalPage Preparation Lightning Replacement PartVentilation Heat and FlamesSwitching The TV ON/OFF Before Switching OnYour TVOperating The TV InitialSettingsPicture menu MenuSystemSound menu You can select Mono, Stereo, Dual a or Dual Sound modeBalance HeadphoneFeature menu Install menu Program menu APS Automatic Programming System Source menuInsert DeletePC Picture Position Menu InstallationMenu System in PC mode PCModePIP and PAP modes Sound in PC modeMute Indicator TV StatusFull PAP modeFreeze Picture Zoom ModesTeletext Fastext To Select a SubcodeTo Exit Teletext To Display The TimeConnect Peripheral Equipment Camera And Camcorder To Connect To AV Input Connecting HeadphonesConnecting Subwoofer Connecting External EquipmentPC Input Typical Display Modes Mode Resolution FrequencyCleaningand care Tips Être éliminés séparément des ordures ménagères Dimensions mm SpecificationsPage Metz always first class