Connect Peripheral
Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you where the different (Optional) equipment should be connected at the rear side of the TV.
Your PLASMA Television is capable of dis- playing High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be con- nected via the HDMI socket
Note: For proper connection of a device to HDMI input of your TV via using a
Via The Scart
Plasma TV has 3 Scart sockets. If you want to connect peripherals (e.g. video, decoder, etc.) which have Scart sockets to the TV, use SCART 1, SCART 2 or SCART 3.
If an external device is connected via the Scart sockets, the TV will be switched to AV mode automatically.
•Do not connect Digital Set Top Box devices via Scart 1. Use Scart 2. Use Scart 3.
Via AerialInput
If you want to connect to your TV, peripherals like video recorders or decoders, but the de- vice you want to connect does not have a Scart socket, you should connect it to the Aerial input of the TV.
If the VCR is connected via Aerial input it is suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of programmes. Most of them are free, others are to be paid for by the viewer. This means that you will need to subscribe to the broad- casting organisation whose programmes
you wish to receive. This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled.
For further information ask your dealer. See also the booklet supplied with your decoder.
Connect a decoder with an aerial socket to the TV
• Connect the aerial cable.
Connect a decoder without an aerial socket to the TV
•Connect the decoder to the TV with a Scart cable to SCART 1.
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you also connect a Scart cable to SCART sock- ets.
Playback NTSC
To use this option you can;
•Connect an NTSC VCR player to a Scart socket at the rear side of the TV.
•Connect an NTSC VCR player to RCA Jacks at the rear side of the TV.
Then, press AV button to select appropri- ate source.
Copy Facility
Source selection for VCR recording.
•Select Feature menu.
•Select
•Select a source to copy the picture from that source.
Search For And Store The Test Signal Of The Video Recorder
•Unplug the aerial cable from the aerial socket of your video recorder.
•Switch on your TV and put the video recorder on the test signal. (See the booklet for your video recorder.)
•Enter the Install menu and select search.
•Search for the test signal of your video re-
- 54 -