Minicom Advanced Systems AVDS user manual Getting Started, Achieving the Best Performance

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging materials for possible future shipment

•Review the contents of this user manual

iGo to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).

2.1Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (we recommend Kramer high- performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely influence signal quality

•

!

i

Position your Kramer AVDS away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.

Place cables away from fluorescent lights, air conditioners, and machines that are likely to generate electrical noise.

Note! In the AVDS system the CAT 5 cables carry electrical power. Therefore do NOT connect them to any other device. To avoid this we recommend you attach the stickers provided to the ends of each CAT 5 cable.

2 AVDS - Getting Started