Minicom Advanced Systems AVDS user manual Remote and Power Remote Units, System Diagram

Page 8

3.2Remote and Power Remote Units

iNote! Any reference to Remote units refers to both Remote and Power Remote units unless stated otherwise.

Both types of Remote units can be up to 110m (360ft) away from the Broadcaster.

The two Remote unit types differ as follows:

The Remote units:

Receive power from the connected shielded CAT 5 FTP cable

Must be connected with shielded CAT 5 FTP cables with metal RJ-45 connectors that have the drain wire soldered to them

The Power Remote units:

Need a separate power supply (provided)

Can be connected with shielded CAT 5 FTP or CAT 5 UTP cables

Produce high-quality audio signals

Figure 3 System Diagram

6

AVDS - Overview

Image 8
Contents Avds Figures Introduction Getting Started Achieving the Best PerformanceSafety Instructions Recycling Kramer ProductsOverview Multi-Functional Avds SystemWithout the Control Unit With the Control UnitPower Remote and Power Remote Units System DiagramRemote Long Units Figures 4, 5, 6 and 7 illustrate the Remote unitsSystem Port Connecting the Avds Cables Connecting an Optional Remote ComputerConnecting the CAT 5 Cables Connecting the Remote Long UnitConnecting the Power Supply Expanding the Avds System Expanded Avds Avds Configuration for a CBT Application CBT ApplicationAvds Detailed Connections Illustrates the detailed connections of the Avds unitsAdjusting the Picture Quality Operating the Avds SystemControl Unit Master to AllExiting Tuning Mode Technical Specifications Broadcaster Line Splitter Remote Power LongAvds Technical Specifications Safety Warning