6 Operating the AVDS System
Once connected the AVDS system broadcasts to all remote monitors/speakers.
6.1The Control Unit
Figure 13 illustrates the Control unit.
VDS Control Unit
Master | Dark |
to all | all |
To Broadcaster Unit’s Control port
MINICOM
Figure 13 Control Unit
The control unit performs the following functions:
Master to All
Press the MASTER TO ALL button to send the broadcaster’s screen with audio to all remote monitors /speakers. The LED above the button lights up.
Press the button again to release the remote monitors/speakers, allowing local monitor viewing (when remote computers are connected).
Dark All
Press the DARK ALL button to darken all remote screens. The LED above the button lights up. (This does not affect audio broadcasting).
Press the button again to release the remote monitors.
Adjusting the Picture Quality
When the picture needs adjusting, tune the picture as follows:
For the Remote unit
•Use a small screwdriver to turn the Picture adjuster on the Remote unit to
AVDS - Operating the AVDS System | 15 |