Appendix

Using the TV features

Note:

1)If you have set the sleep timer, the Off-time (See Using the CLOCK menu) you set will be cleared automatically.

2)If you have set the On-time (See Using the CLOCK menu), when the preset time comes to turn on the TV, the sleep timer will be set to 120 minutes automatically. It will be cancelled automatically when you execute any operation with the TV(This feature is just for nobody being at home, however the TV turns on automatically).

Displaying the current channel number on screen

Press the DISPLAY button on the remote control, the current channel number will display on the top-right corner of the screen. Whenever you want to cancel it, press the DISPLAY button again.

Switching between two channels

Press the RECALL button on the remote control to return to the previous channel that you have just viewed. Press the RECALL button repeatedly, the screen will alternate between the present and previous channels.

Setting the child lock

Press the LOCK button to lock or unlock the TV.

When the TV is locked, the screen will turn to blue background, and nothing can be viewed unless you press LOCK again to unlock it.

Selecting the signal source

Press the TV/AV button to select TV or AV mode.

Cleaning and care

WARNING: TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified service technicians.

To clean the TV screen:

1)Unplug the TV to avoid possible shock hazard.

2)Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water because water spills into the cabinet can cause damage to the TV.

3)Wipe off any excess moisture with a clean dry cloth.

4)Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.

Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet. These chemicals can damage the finish of the cabinet.

-17-